Search found 55 matches

by kitsun
Wed Aug 12, 2015 12:54 am
Forum: Workshop
Topic: CCT change and engine dies after 4-5 minutes
Replies: 13
Views: 2300

Re: CCT change and engine dies after 4-5 minutes

Hi Guys Thanks for the feedback, did a check of all the hoses and true enough I connected the vac hose wrong. Connected it to the petcock down pipe instead of the vacuum valve which is at the back and towards the 9 o'clock position when looking from the front. She is revving like a champ now. :thumb...
by kitsun
Tue Aug 11, 2015 3:42 pm
Forum: Workshop
Topic: CCT change and engine dies after 4-5 minutes
Replies: 13
Views: 2300

CCT change and engine dies after 4-5 minutes

Hi All Changed my CCT with a pair of new auto CCTs that was sitting around on the shelf. Checked the valve clearances and only the front 2 exhausts valves and the left front intake valves need adjusting as they were all tight and below tolerance. Put everything back together, checked cam timings - o...
by kitsun
Fri Aug 29, 2014 5:43 pm
Forum: Pimp Your Ride
Topic: who uses two finger braking
Replies: 16
Views: 4220

Re: who uses two finger braking

Looks like you'll have a no finger braking before long using these levers
by kitsun
Mon Jul 14, 2014 2:50 pm
Forum: Workshop
Topic: Stiff Knob - Choke
Replies: 6
Views: 1022

Re: Stiff Knob - Choke

viagra overdose?
by kitsun
Tue Jun 24, 2014 4:21 pm
Forum: Workshop
Topic: Help required! Cam cap Failure!
Replies: 19
Views: 1943

Re: Help required! Cam cap Failure!

what about getting a completely new head assembly from Partzilla? USD519 + USD100 shipping?

http://www.partzilla.com/parts/search/H ... parts.html

k
by kitsun
Mon Jun 23, 2014 7:00 am
Forum: Workshop
Topic: what tyres
Replies: 8
Views: 1089

Re: what tyres

minibreaker wrote:i have at the minute dunlops but would like a stickier tyre what would you lot advise i do comute but i also ride hard when im not comuting maybe a bt21 or the like

I use Metzeler M5 Interact. Great tyre and managed a 45 degree lean angles on it

Kit
by kitsun
Sun Jun 22, 2014 12:52 am
Forum: Workshop
Topic: 2003 model are your lights always on?
Replies: 4
Views: 622

Re: 2003 model are your lights always on?

chric wrote:2003 model are your lights always on?
the 19 ltr faster version
I've got a 1998 model and the lights are always on once the key is in the on position. there is no separate off switch for Japanese market models.

k
by kitsun
Sat Jun 21, 2014 1:09 pm
Forum: General Chat
Topic: Paw print
Replies: 37
Views: 2252

Re: Paw print

kit, can you estimate the weight of the cat by the viscosity of the mud times the depth of the impression divided by the speed of running? :D AMcQ, actually yes that is possible. assuming that the mud has not dried too much as when the paw print was made. just put a known weight on the mud, measure...
by kitsun
Fri Jun 20, 2014 2:03 pm
Forum: Workshop
Topic: Compression testing advice
Replies: 15
Views: 2531

Re: Compression testing advice

From what I've read compression testing should be done when the engine is warm, but can effective results be had from a cold engine though? I'm being lazy really as I don't want to build my bike back up to find I've got to stop it back down again to resolve any issue. Warming up the engine is to im...
by kitsun
Wed Jun 18, 2014 9:09 am
Forum: General Chat
Topic: Pointless facts
Replies: 33
Views: 2285

Re: Pointless fact 1.

Yes and vitamin A is toxic if you take too much carrots as 1 molecule of beta carotene = 2 molecules vitamin A. Vitamin A is stored in the liver and once the limit is reached it overflows. Into the blood stream causing death via toxicity. In the early days of polar exploration, explorers have died f...
by kitsun
Wed Jun 18, 2014 7:34 am
Forum: General Chat
Topic: Paw print
Replies: 37
Views: 2252

Re: Paw print

Can we have a new section on animal tracking skills :lol: Is there a test and then a badge if we pass? Ok. Tracking 101:- First picture. Have a close look. At the tip of the 2 front toes you can see that there are 2 small holes/indentations That's the claws. Now look at the foot pad., it sunk in le...
by kitsun
Tue Jun 17, 2014 4:40 pm
Forum: General Chat
Topic: Paw print
Replies: 37
Views: 2252

Re: Paw print

While I was taking a piss in a farmers cut at work today I found these . Big cat or are they a dog print http://img.tapatalk.com/d/14/06/17/a7y2ude8.jpg http://img.tapatalk.com/d/14/06/17/u7ybanur.jpg I used a 50p to show the size Dog. I adduce the following observations:- 1. I can see signs of cla...
by kitsun
Sat Jun 14, 2014 4:25 pm
Forum: Workshop
Topic: Mileage before valves need adjusting
Replies: 8
Views: 1260

Re: Mileage before valves need adjusting

darkember wrote:Usually you will find them on the tight side. Just grind them down by hand to the center of the range & you will never have to do them again.
how do you grind them by hand and still ensure that the shims are tolerably flat?
by kitsun
Fri Jun 13, 2014 1:11 pm
Forum: Workshop
Topic: Mileage before valves need adjusting
Replies: 8
Views: 1260

Re: Mileage before valves need adjusting

Yep every 16000 miles unless you have had some head work done that requires them being done. or just want to check them for peace of mind. If they have not been checked since owning the bike then it's always a good idea to check them so you at least know where the bike stands maintenance wise. Is t...
by kitsun
Thu Jun 12, 2014 4:42 pm
Forum: Workshop
Topic: Mileage before valves need adjusting
Replies: 8
Views: 1260

Mileage before valves need adjusting

Dear All

Just doing a poll to see what is the mileage one has to do before the valves clearances are out and need adjusting.

kit