Workshop day 2016
Workshop day 2016
Come on then, when & where is the next one??
I'm desperate for some Carby Syncy Helpy Helpy!
I'm desperate for some Carby Syncy Helpy Helpy!
Jamie
- lloydie
- Posts: 20921
- Joined: Mon Jan 17, 2011 11:16 pm
- Location: In the garage somewhere in Coventry
Re: Workshop day 2016
Will I have to find you again now ?!AMCQ46 wrote:I am happy to host a midlands one late April
Re: Workshop day 2016
given that CK knows where I live, I suspect that it wont be much of a challange
AMcQ
- lloydie
- Posts: 20921
- Joined: Mon Jan 17, 2011 11:16 pm
- Location: In the garage somewhere in Coventry
Re: Workshop day 2016
Where would the fun be in that ?
I've seen you in a village out west ! I'm getting closer [FACE WITH STUCK-OUT TONGUE AND WINKING EYE]
I've seen you in a village out west ! I'm getting closer [FACE WITH STUCK-OUT TONGUE AND WINKING EYE]
Re: Workshop day 2016
Are Aprilias welcome?
Re: Workshop day 2016
if you don't breakdown just getting hereSteve6088 wrote:Are Aprilias welcome?
AMcQ
- Pete.L
- Forum Health And Safety Officer
- Posts: 7224
- Joined: Fri Sep 26, 2003 5:09 pm
- Location: Bristol
Re: Workshop day 2016
You don't expect him to stay on all the way there do you?AMCQ46 wrote:given that CK knows where I live, I suspect that it wont be much of a challange
My new ride is a bit of a Howler and I love to make her Squeal
Re: Workshop day 2016
would be a Saturday, so 23rd or 30th April.
start any time after 9am with Bacon butties and a bru.
usual rules.
a few experienced Owners will be available to help you take on those tricky jobs you are not sure you can do, like Manual CCT or stopper mod. carb setting and balancing, steering head bearings, fitting new for springs, TPS adjustment, wheel bearings etc.
you bring all the parts you need and the tools and knowledge will be there to help you get it done.
BBQ for lunch
if we end early we can get a bit of a ride out together as we escort you out of the county.
what do you need to bring?
bike
planned parts you want to fit ..... is good if you check on here first to make sure we plan the parts needed for the job
any commonly used tools like a set of Allan keys, Philips screw driver, 8, 10, 12 mm spanners [I have all these tools, but there will be a delay if you all have to wait to do the simple stuff]
Biscuits
big stuff like below will all be available
paddock stands and abba stands
Hammers, grinders, drills, drifts
carb balance tools
all tools to do stopper mods
impact driver
Hammers
Workshop manual
blow torch
dremmel
hammers
cable ties
tank tape
Hammer
I have a much bigger garage now, so should be able to have at least 5 bikes being worked on under cover and still have room for talking baldrocks and drinking tea.
who would be interested and what jobs are needing done
I will start a specific thread later
start any time after 9am with Bacon butties and a bru.
usual rules.
a few experienced Owners will be available to help you take on those tricky jobs you are not sure you can do, like Manual CCT or stopper mod. carb setting and balancing, steering head bearings, fitting new for springs, TPS adjustment, wheel bearings etc.
you bring all the parts you need and the tools and knowledge will be there to help you get it done.
BBQ for lunch
if we end early we can get a bit of a ride out together as we escort you out of the county.
what do you need to bring?
bike
planned parts you want to fit ..... is good if you check on here first to make sure we plan the parts needed for the job
any commonly used tools like a set of Allan keys, Philips screw driver, 8, 10, 12 mm spanners [I have all these tools, but there will be a delay if you all have to wait to do the simple stuff]
Biscuits
big stuff like below will all be available
paddock stands and abba stands
Hammers, grinders, drills, drifts
carb balance tools
all tools to do stopper mods
impact driver
Hammers
Workshop manual
blow torch
dremmel
hammers
cable ties
tank tape
Hammer
I have a much bigger garage now, so should be able to have at least 5 bikes being worked on under cover and still have room for talking baldrocks and drinking tea.
who would be interested and what jobs are needing done
I will start a specific thread later
AMcQ
Re: Workshop day 2016
I'll come just for laughs!
Sent from my SM-A300FU using Tapatalk
Sent from my SM-A300FU using Tapatalk
- lloydie
- Posts: 20921
- Joined: Mon Jan 17, 2011 11:16 pm
- Location: In the garage somewhere in Coventry
Re: Workshop day 2016
And remember it's not the case where you bring your bike and have someone else do the work .
You do the work yourself but with guidance from a bunch of old farts that know what they are doing .
You do the work yourself but with guidance from a bunch of old farts that know what they are doing .
Re: Workshop day 2016
GRAINSTORM III...coming soon to...well Grain & the MacCave...
Looking at late April early May to be confirmed...
Looking at late April early May to be confirmed...
Making up since 2007, sometimes it's true...Honest...
Re: Workshop day 2016
Woohoo! 2 wsd's, awesome, I'll be at both. Partly to help but mostly to get in the way and inconvenience everyone.
Jamie
Re: Workshop day 2016
Fixed it for ya mate
AMCQ46 wrote:would be a Saturday, so 83rd or 39th Aprilia.
Lloydie will have no doubt worked out where I live by this point, so basically, ride to my house and enter the "ample" darkly lit garage at your own risk. Bring lube.
I will start a specific thread later
p.s bring lube
P.p.s, bring lube
Jamie
- lloydie
- Posts: 20921
- Joined: Mon Jan 17, 2011 11:16 pm
- Location: In the garage somewhere in Coventry
Re: Workshop day 2016
Ha ha y'all need it !!