90 deg. Valve adapter...FREE...Dibbed, Claimed & posted out!
Moderator: VTRDark
90 deg. Valve adapter...FREE...Dibbed, Claimed & posted out!
...Yes Free to a good home only, of course !
Was on an old wheel I had. Never noticed it before.
Anyone who wants it post up dibs on here then PM me with your addy & I'll get it posted to you.
There is only one so don't expect two in the packet.
Ideal for the front wheel or if your really anal about it swap between front & rear when checking your pressures.
Comes with a free metal cap but no free air...
Was on an old wheel I had. Never noticed it before.
Anyone who wants it post up dibs on here then PM me with your addy & I'll get it posted to you.
There is only one so don't expect two in the packet.
Ideal for the front wheel or if your really anal about it swap between front & rear when checking your pressures.
Comes with a free metal cap but no free air...
Last edited by MacV2 on Wed Jul 09, 2014 4:50 pm, edited 1 time in total.
Making up since 2007, sometimes it's true...Honest...
-
- Posts: 328
- Joined: Fri Jun 06, 2014 9:11 am
- Location: Southampton . Hampshire
Re: 90 deg. Valve adapter...FREE...
Hi .
Can I have please :-) just what I'm looking for .
Can I have please :-) just what I'm looking for .
-
- Posts: 99
- Joined: Tue Feb 11, 2014 1:03 am
- Location: Eastern Victoria, Australia
- Contact:
Re: 90 deg. Valve adapter...FREE...
Does it angle to the left as well?
It may only be my opinion but it's mine!
~ My Bikes 2014 VFR1200F & 2000 VTR1000F ~
~ My Bikes 2014 VFR1200F & 2000 VTR1000F ~
Re: 90 deg. Valve adapter...FREE...
Yep.monkeymatt wrote:Hi .
Can I have please :-) just what I'm looking for .
Making up since 2007, sometimes it's true...Honest...
Re: 90 deg. Valve adapter...FREE...
In the post today Mr Monkey...
Await a small plop on the mat Matt...
Await a small plop on the mat Matt...
Making up since 2007, sometimes it's true...Honest...
-
- Posts: 328
- Joined: Fri Jun 06, 2014 9:11 am
- Location: Southampton . Hampshire
Re: 90 deg. Valve adapter...FREE...Dibbed, Claimed & posted
Many thanks .:-) much appreciated.
Re: 90 deg. Valve adapter...FREE...Dibbed, Claimed & posted
Just don't leave it permanently fitted on a standard valve,
Chris.
Chris.
Re: 90 deg. Valve adapter...FREE...Dibbed, Claimed & posted
Oh don't start that again...sirch345 wrote:Just don't leave it permanently fitted on a standard valve,
Chris.
Poor Old Matt I'll be paranoid now...
Matt there is a very long thread about why to & why not to fit these, do a search & have a read & make your own mind up.
I don't fit them myself as I've never had a problem getting a nozzle on. Until I smashed my wrist up that is & with restricted movement is a bit hard to do which is why I bought a right angle adapter hose thing ujamaflip but at £16 it's not to everyone's pocket...
This was just on an old wheel I had laying around.
Making up since 2007, sometimes it's true...Honest...
- agentpineapple
- Posts: 15124
- Joined: Sat Mar 26, 2011 9:16 pm
Re: 90 deg. Valve adapter...FREE...Dibbed, Claimed & posted
I had the biketek ones on for 1000miles so far, and they've been spot on....
HEY YOU GUYS!!!!!!
Re: 90 deg. Valve adapter...FREE...Dibbed, Claimed & posted
Honestly I missed that Mac, although I did think fitting an angled valve adapter might be a controversial subjectMacV2 wrote:Oh don't start that again...sirch345 wrote:Just don't leave it permanently fitted on a standard valve,
Chris.
Poor Old Matt I'll be paranoid now...
Matt there is a very long thread about why to & why not to fit these, do a search & have a read & make your own mind up.
Very generous of you to supply it FOC
Chris.
Re: 90 deg. Valve adapter...FREE...Dibbed, Claimed & posted
what Matt dosent know is FOC stands for...Fecking 'Orrendous Charges...! He hasn't seen the invoice for postage yet ...sirch345 wrote:Honestly I missed that Mac, although I did think fitting an angled valve adapter might be a controversial subjectMacV2 wrote:Oh don't start that again...sirch345 wrote:Just don't leave it permanently fitted on a standard valve,
Chris.
Poor Old Matt I'll be paranoid now...
Matt there is a very long thread about why to & why not to fit these, do a search & have a read & make your own mind up.
Very generous of you to supply it FOC
Chris.
There's Acme & then there's El Presidente Acme. We go the extra mile to charge you more.
Making up since 2007, sometimes it's true...Honest...
Re: 90 deg. Valve adapter...FREE...Dibbed, Claimed & posted
only you could have come up with that Mac
Chris.
Chris.
-
- Posts: 328
- Joined: Fri Jun 06, 2014 9:11 am
- Location: Southampton . Hampshire
Re: 90 deg. Valve adapter...FREE...Dibbed, Claimed & posted
Arrived today mac .
Many thanks
I'm not fitting it on the storm it's going on my bike trailer
Many thanks
I'm not fitting it on the storm it's going on my bike trailer
Re: 90 deg. Valve adapter...FREE...Dibbed, Claimed & posted
Ah well then in that case it's not free !monkeymatt wrote:Arrived today mac .
Many thanks
I'm not fitting it on the storm it's going on my bike trailer
I gave it away on the assumption that it was Storm bound.
You will be hearing from my lawyers ''Sue, Grabbit & Run'' forthwith for false dibbing... See you in court Pal !
Making up since 2007, sometimes it's true...Honest...
Re: 90 deg. Valve adapter...FREE...Dibbed, Claimed & posted
MacV2 wrote: You will be hearing from my lawyers ''Sue, Grabbit & Run'' forthwith for false dibbing...
Chris.