Working on jetting my 'Hawk. Got the stage 1 kit from
DynoJet, a K&N Filter, and High-mount Jardine RT-One slipons.
Tried the basic settings, and think they're way off..
I'm at sea-level with a median temp of about 85 deg. F.
Currently running:
190 F/195 R main jets
Clips on the 5th groove from the top on both needles
2.5 turns out on the pilot screws.
Seems to pull well from 5K and up, but backfires from
4K down and will occasionally stall when idling.
Anyone do any better?
TJ