VTR1000.ORG

Before you buy a new engine please ensure that you are using an OEM filter oil filter and not an aftermarket diaphragm type. In some cases this type of oil filter causes back pressure which makes the oil pressure release valve dump oil back into the sump causing a drop in oil pressure in the rest of...

I know of no cams using 254/254, The nearest are Moriwaki ST1 cams at 255/249 measured at 1mm lift.
How reliable is the information you have been given?
If these cams are Moriwaki's then you have a decent street cam set.

VTR CAM TIMING PROCEDURE WITH BOTH FRONT CYLINDER AND REAR CYLINDER CAMSHSHAFTS REMOVED (Starting from scratch) 1) Turn C/shaft until FT appears and lines up with the mark on the cover 2) Fit FRONT CYLINDER Exhaust camshaft with the mark FE on the exhaust camwheel level with the c/head and at the fr...

OEM CAMSHAFTS

INLET = 0.17mm +/- 0.03mm
EXHAUST = 0.30mm +/- 0.03mm

RE-PROFILED AND MORIWAKI ST1 CAMSHAFTS

INLET = 0.20mm +/- 0.03mm
EXHAUST = 0.30mm +/- 0.03mm

ST2 CAMSHAFTS

INLET = 0.20mm + 0.04mm
EXHAUST = 0.30mm + 0.04mm

I hope the info below clarifies the current position The fork “tune” that I offer for Street and occasional Trackdays will cure all the well documented VTR front suspension issues. It consists of different linear springs to suit your weight, different shims, different oil grade, different air gap, m...

Thank you to all the guys who have helped me over my difficulty in posting my reply. As you see thanks to your help I have been successful Cheers Roger

Hi Guys, The question of CCTs is multi-faceted and complex one and sadly there are no definitive answers. Here are my experiences for what they are worth! All the Revolution Racing VTR1000f Firestorms (ST2 and ST3 raced using OEM CCTs without issue. As they were being raced also under the banner of ...

Hi Guys, I have just written another comprehensive reply to the CCT question but for the second time it has failed to appear after I submitted it. My previous two short comments have appeared. Please can someone tell me if there is a restriction on the size of a Post or could it have gone into a Dra...

Hi Guys
As my second post has appeared on the Forum I will post my contribution this evening

Hi Guys,
Yesterday I posted a comprehensive reply on CCTs but it appears not have appeared on the post.
I am looking into the reason it has not appeared. Assuming this post appears then I will re-post my reply

There is a problem here. Please telephone me on 07970915259 anytime and I will try and resolve this issue.

Hi Guys At the 20th Anniversary meet up at the National M/C museum I was speaking to a guy regarding replacement Moriwaki exhaust canister straps. UNFORTUNATELY I CANNOT FIND ANY CONTACT DETAILS FOR HIM NOR CAN I REMEMBER HIS NAME!! :roll: It must be an age thing :? Hopefully he will read this post ...

I look forward to joining all the VTR enthusiasts to celebrate the launch of a great and much loved bike.

Welcome to the club.
I go fishing on the Dee during the first week of May every year and stay at the Feughside Hotel at Banchory,
There are always loads of bikers on the carpark so it must be on the "rideout" route.
Hope to see you there over the Bank Holiday!