looking as good as that is a long way down the road lol....lloydie wrote:If you want it to look like yeti's you better start saving and hunting on the jap auction sites as you won't find the bits on the western world only Asia (lots of good sh1t over there (jonsey might be able to help there )fabiostar wrote:now that with a number plate is how i intend mine to end up . it mite take a bit of time and wont be this year im sure but its gona be a rolling rideable bike by spring time .
a bit of spondoness.
Re: a bit of spondoness.
the older i get,the faster i was
- lloydie
- Posts: 20921
- Joined: Mon Jan 17, 2011 11:16 pm
- Location: In the garage somewhere in Coventry
Re: a bit of spondoness.
And about 20k !!! Unless you get yeti to part with his ! But unlikely
Re: a bit of spondoness.
im working on murdering him as we speak lollloydie wrote:And about 20k !!! Unless you get yeti to part with his ! But unlikely
the older i get,the faster i was
Re: a bit of spondoness.
You have not met the Yeti then. You may may be able to reach his groin areaim working on murdering him as we speak lol
==============================Enter the Darkside
Re: a bit of spondoness.
VTRDark wrote:You have not met the Yeti then. You may may be able to reach his groin areaim working on murdering him as we speak lol
how can so much porn be allowed
the older i get,the faster i was
- lloydie
- Posts: 20921
- Joined: Mon Jan 17, 2011 11:16 pm
- Location: In the garage somewhere in Coventry
Re: a bit of spondoness.
Just a shame it's like looking at 1990 old jaz mag !!!fabiostar wrote:VTRDark wrote:You have not met the Yeti then. You may may be able to reach his groin areaim working on murdering him as we speak lol
how can so much porn be allowed
Still nice tho even with a few wrinkles and a few heaths of hair !!
- lloydie
- Posts: 20921
- Joined: Mon Jan 17, 2011 11:16 pm
- Location: In the garage somewhere in Coventry
Re: a bit of spondoness.
Yeti is just a big girl !! But I still wouldn't want to be bitch slapped by him/herfabiostar wrote:do you mean the bike or yeti lol
Re: a bit of spondoness.
i see your point lol... well watch strictly come dancing or mancave. mmmmmmmmm new quick action throttle and linkage bearings cleaned and greased . liitle small steps. looking round the bike eveythings been drilled for lockwire tho not on the engine.lloydie wrote:Yeti is just a big girl !! But I still wouldn't want to be bitch slapped by him/herfabiostar wrote:do you mean the bike or yeti lol
the older i get,the faster i was
- lloydie
- Posts: 20921
- Joined: Mon Jan 17, 2011 11:16 pm
- Location: In the garage somewhere in Coventry
Re: a bit of spondoness.
Pull the cam covers and measure the cam lobs , might be a nice surprise in there ,also check the porting
- StormyRob
- Posts: 1565
- Joined: Sat Nov 07, 2015 7:33 am
- Location: Northern Ireland. The place of legend
Re: a bit of spondoness.
Seems to be a fantast find fabulous. Well done. I am sure a lot are envious.
If you don't try you never know if you can do it.
Re: a bit of spondoness.
How you doing Rob? Did you get yourself another bike?
Carpe diem, quam minimum credula postero
F3, 954 USD front, K Tech springs, Braced swinger, Penske shock, Six spoke Mockesini wheels, Harris rearsets, QaT, Flywheel diet!, A&L stacks, stick coils, K&N, FP Ti jets, lashings of Ti & CF
F3, 954 USD front, K Tech springs, Braced swinger, Penske shock, Six spoke Mockesini wheels, Harris rearsets, QaT, Flywheel diet!, A&L stacks, stick coils, K&N, FP Ti jets, lashings of Ti & CF
Re: a bit of spondoness.
Kev L wrote:How you doing Rob? Did you get yourself another bike?
lol yeah one of those slow red one lols.
actually after calling the man a numpty for wanting to streetfighter it iv since changed my mind, its a tad rough on the outside but after pulling it apart it seems every bolt has had coppa slip grease on it and its better than its looks would have me believe..so well done sir.
the older i get,the faster i was
Re: a bit of spondoness.
now on that subject . had a wee peep yesterday and pulled the covers of aswell. somebody at some stage has done a little polishing to the inlet ports compared to my own but heres the rub(no pun of course) the cams. this might sound stupid and i got a friend down whos wiser than me to check but the engine seems to have 4 exhaust cams in it? wtf is that all about,is it possible cause its running fine?lloydie wrote:Pull the cam covers and measure the cam lobs , might be a nice surprise in there ,also check the porting
answers on a postcard to a freaked out owner
the older i get,the faster i was
Re: a bit of spondoness.
Rob's gone over to the dark side he displayed such good taste with his last bike! Go's to show you have to be vigilant or you may end up making a complete mistake in your choice of colour!!!!
Carpe diem, quam minimum credula postero
F3, 954 USD front, K Tech springs, Braced swinger, Penske shock, Six spoke Mockesini wheels, Harris rearsets, QaT, Flywheel diet!, A&L stacks, stick coils, K&N, FP Ti jets, lashings of Ti & CF
F3, 954 USD front, K Tech springs, Braced swinger, Penske shock, Six spoke Mockesini wheels, Harris rearsets, QaT, Flywheel diet!, A&L stacks, stick coils, K&N, FP Ti jets, lashings of Ti & CF