VTR1000.ORG

Hi all, I am after some very thin washers to shim some stuff out, The washers what I am looking for are about the same thickness as a razor blade so a lot thinner than a std washer, I have seen them used on the std Honda mirrors at the pivoting point, would anyone know what type of washer they are and where to get them, Thanks in advance

Have you seen these if not take your pick, seeing as I'm not sure of exact size you require:-
http://www.ebay.co.uk/sch/i.html?_from= ... t=0&_oac=1

Chris

sirch345 wrote:Have you seen these if not take your pick, seeing as I'm not sure of exact size you require:-
http://www.ebay.co.uk/sch/i.html?_from= ... t=0&_oac=1

Chris

Thanks for that Chris, why couldn't I find them

Shim is keyword to be using as washers will be thicker.

The shims used for cartridge fork internals are very thin, usually 0.1 or 0.15mm, and available in a range of diameters. I have a heap from various fork rebuilds but I may be on the wrong side of the planet. Your local suspension tuner should be able to sell you some.

Thanks for the info

carmanbikes wrote:

sirch345 wrote:Have you seen these if not take your pick, seeing as I'm not sure of exact size you require:-
http://www.ebay.co.uk/sch/i.html?_from= ... t=0&_oac=1

Chris

Thanks for that Chris, why couldn't I find them

As Carl points out, it's all about the keyword, or words, something I used to struggle with finding myself
After loads of practice I think I'm getting better at it just

Chris.

And there was me thinking you had been to the Pinapple school of eBaying Chris

Try a bearing factors.

cybercarl wrote:And there was me thinking you had been to the Pinapple school of eBaying Chris

Is pineapple schooling any relation to the school of Marty

I've got TMFS (Twitchy Mouse Finger Syndrome) when on Ebay at times, is that any good

Chris.

Indeed Pineapples and Marty are joined at the hip

eBay is so pants these days. It really has gone downhill over the years and too many businesses on there. Shame really.