US/UK VTR Project.

chrisgreer23 · Post by **chrisgreer23** » Thu Feb 26, 2015 7:12 am

Am I correct in assuming this is a different regulator rectifier frome stock?

Wicky · Post by **Wicky** » Thu Feb 26, 2015 10:53 am

Yup - stock unit on early VTRs is an unfinned unit - later Hondas were finned but not that type (cheapy Chinese?). Try and go for a mosfet upgrade.

chrisgreer23 · Post by **chrisgreer23** » Thu Feb 26, 2015 10:57 am

Any way to know if this is a mosfet kind?

Wicky · Post by **Wicky** » Thu Feb 26, 2015 11:11 am

Mainstream Mosfet R/Rs mainly have different connectors and are marked FH > http://www.vtr1000.org/phpBB3/viewtopic ... ty#p351482

chrisgreer23 · Post by **chrisgreer23** » Thu Feb 26, 2015 11:23 am

Is there anything I should do to the frame now that it's free of the rest of the bike?

agentpineapple · Post by **agentpineapple** » Thu Feb 26, 2015 11:38 am

chrisgreer23 wrote:Is there anything I should do to the frame now that it's free of the rest of the bike?

give it a good clean.......

and maybe fit new head bearings, I use taper bearing from all balls....

chrisgreer23 · Post by **chrisgreer23** » Thu Feb 26, 2015 5:11 pm

chrisgreer23 · Post by **chrisgreer23** » Thu Feb 26, 2015 5:11 pm

chrisgreer23 · Post by **chrisgreer23** » Thu Feb 26, 2015 5:13 pm

I can take appart the remote control and I can almost put it back together.

chrisgreer23 · Post by **chrisgreer23** » Thu Feb 26, 2015 5:17 pm

Um, wasnt there a bike here yesterday?

chrisgreer23 · Post by **chrisgreer23** » Thu Feb 26, 2015 5:18 pm

chrisgreer23 · Post by **chrisgreer23** » Thu Feb 26, 2015 5:19 pm

agentpineapple · Post by **agentpineapple** » Thu Feb 26, 2015 5:48 pm

time to get cleaning and re-greasing......

it's amazing how quickly they come apart, takes a tad longer to put them back together tho....

chrisgreer23 · Post by **chrisgreer23** » Thu Feb 26, 2015 6:05 pm

This bike is being sold. Every piece except for the frame. Im picking up my new bike in the morning

(see bike below) I cant wait. I will also be fitting a 19l tank and a Penske rear shock

. Once all that is together, I have a piece of custom work that I havnt mentioned yet (insert evil laugh).

New bike:

Mav617 · Post by **Mav617** » Thu Feb 26, 2015 8:19 pm

ooooh, that's nice mate

VTR1000.ORG