Rear Wheel - Captive Spacers - want any?

[MacV2]

I only need the rears as my front end is a USD unit with an SP1 wheel and I already have Ti captive spacers fitted. But if the deal is only for the lot I will have them and get rid of the fronts.

I'll take your unwanted fronts off you Kev.

[Mav617]

I'm sure he'll do rear only, probably £20 though.

[Kev L]

I only need the rears as my front end is a USD unit with an SP1 wheel and I already have Ti captive spacers fitted. But if the deal is only for the lot I will have them and get rid of the fronts.

I'll take your unwanted fronts off you Kev.

Ok mate, that solves that conundrum then. They''ll be £30 Mac!!!

[agentpineapple]

Here's his answer on price and different materials:

hi Roger.
They would be £29 a set. These are made on a bar fed lathe which involves writing programmes etc for each spacer which is time consuming...All our spacers are made from T7 Aerospace grade Alloy, it is not feasible to use different materials.
Regards
Mick


So - I'll sort the postage, and order everyone's and send them out if you can confirm you're happy to pay £29 for a full set (front/rear)?

i'm in mate, shall I pm you regarding payment

[agentpineapple]

just need a certain person to knock me up some ti spindles now....

[Mav617]

Here's his answer on price and different materials:

hi Roger.
They would be £29 a set. These are made on a bar fed lathe which involves writing programmes etc for each spacer which is time consuming...All our spacers are made from T7 Aerospace grade Alloy, it is not feasible to use different materials.
Regards
Mick


So - I'll sort the postage, and order everyone's and send them out if you can confirm you're happy to pay £29 for a full set (front/rear)?

i'm in mate, shall I pm you regarding payment

Hi Marty, I'll order them for everyone who says they want some then you can Paypal me with your address details when I get them here and I'll send them over.

[agentpineapple]

Here's his answer on price and different materials:

hi Roger.
They would be £29 a set. These are made on a bar fed lathe which involves writing programmes etc for each spacer which is time consuming...All our spacers are made from T7 Aerospace grade Alloy, it is not feasible to use different materials.
Regards
Mick


So - I'll sort the postage, and order everyone's and send them out if you can confirm you're happy to pay £29 for a full set (front/rear)?

i'm in mate, shall I pm you regarding payment

Hi Marty, I'll order them for everyone who says they want some then you can Paypal me with your address details when I get them here and I'll send them over.

nice one dude

[Mav617]

Okay - so the count currently is:

Me
Mac
Wicky
AMcQ
Kev L
Fabio
Marty (AP)
Kermit Le Frog

Who did I inevitably miss and can you PM me your postal addresses and I'll get him to send them to you direct and you can Paypal me when you've got your mitts on them?

Rog

[sirch345]

For some reason I thought they where going to be SS. I shall stick with what I have thanks so pulling out.

I was hoping the same, so thanks all the same Mav I'll pass on these,

Chris.

[KermitLeFrog]

Okay - so the count currently is:

Me
Mac
Wicky
AMcQ
Kev L
Fabio
Marty (AP)
Kermit Le Frog

Who did I inevitably miss and can you PM me your postal addresses and I'll get him to send them to you direct and you can Paypal me when you've got your mitts on them?

Rog

You have my address,
Cheers
Ian

[freeridenick]

Okay - so the count currently is:

Me
Mac
Wicky
AMcQ
Kev L
Fabio
Marty (AP)
Kermit Le Frog

Who did I inevitably miss and can you PM me your postal addresses and I'll get him to send them to you direct and you can Paypal me when you've got your mitts on them?

Rog

Me, I'm in too.

[fabiostar]

thats me pm:d...

[agentpineapple]

pm sent....

[AMCQ46]

pm sent....

and me

[Mav617]

Cheers guys, he was doing the "coding" for the machine so shouldn't be long now.

Rog