Testing fuel sender unit

Need advice on which oil to use or which tyre best suits you? Share your topic and get help here.
Post Reply
User avatar
Donut 77
Posts: 189
Joined: Tue Feb 28, 2023 11:44 pm

Testing fuel sender unit

Post by Donut 77 »

Any idea how to test these prior to installation?

TIA


Image
Good job I’m not in a rush…
No longer in the B154-M club.
tony.mon
Posts: 16003
Joined: Wed Jul 25, 2007 10:46 pm
Location: Norf Kent

Re: Testing fuel sender unit

Post by tony.mon »

Stick it in. See if it works. If not. Replace.
Simples!
It's not falling off, it's an upgrade opportunity.
User avatar
Donut 77
Posts: 189
Joined: Tue Feb 28, 2023 11:44 pm

Re: Testing fuel sender unit

Post by Donut 77 »

Yes, but I’m a way off any power yet and while the tank is still awaiting a de-rust and in bits I need to test this, as there’s some cheap on eBay right now if it’s faulty.

Does it measure the actual level or just sense when fuel is low? I was thinking could the bit with wire be tested in water or even petrol and what readings should I be looking for?
Good job I’m not in a rush…
No longer in the B154-M club.
Post Reply