hard clutch

Keeping you informed of what's happening with the forum, updates, downtime etc.
Dickiebig
Posts: 951
Joined: Sun Nov 22, 2015 12:19 pm
Location: Gloucester

Re: hard clutch

Post by Dickiebig »

jzape2005 wrote: Sun Aug 23, 2020 3:13 pm
Richard wrote:I feel your pain! I used to own a Laverda! ImageImage
Hello, It's true, I had a laverda 750 sf 2, I know what a men's clutch is, I will always regret having sold it.

Enviat des del meu Redmi S2 usant Tapatalk
Me too 🤣👍
And I also regret selling it.
I regret selling most of my bikes, especially when I see the prices they fetch these days.
I hope as is going well for you.
Stay safe, stay covid safe 👍👍
Dickiebig
Posts: 951
Joined: Sun Nov 22, 2015 12:19 pm
Location: Gloucester

Re: hard clutch

Post by Dickiebig »

I hope all is going well
jzape2005
Posts: 55
Joined: Sun Sep 29, 2013 6:12 pm

Re: hard clutch

Post by jzape2005 »

Richard wrote:
jzape2005 wrote: Sun Aug 23, 2020 3:13 pm
Richard wrote:I feel your pain! I used to own a Laverda! ImageImage
Hello, It's true, I had a laverda 750 sf 2, I know what a men's clutch is, I will always regret having sold it.

Enviat des del meu Redmi S2 usant Tapatalk
Me too ImageImage
And I also regret selling it.
I regret selling most of my bikes, especially when I see the prices they fetch these days.
I hope as is going well for you.
Stay safe, stay covid safe ImageImage
thanks, say hello to you too, take care of this bad bug

Enviat des del meu Redmi S2 usant Tapatalk

User avatar
sirch345
Site Admin
Posts: 22093
Joined: Mon Aug 25, 2003 10:35 pm
Location: The West Country.

Re: hard clutch

Post by sirch345 »

jzape2005 wrote: Sun Aug 23, 2020 3:31 pm
jzape2005 wrote:
Richard wrote:I feel your pain! I used to own a Laverda! ImageImage
Hello, It's true, I had a laverda 750 sf 2, I know what a men's clutch is, I will always regret having sold it.

Enviat des del meu Redmi S2 usant Tapatalk
I think that after a good review of the entire system, I have found the solution. change the clutch hose, put a new one, review the slave cylinder, the rod that pushes the clutch discs, I have also changed the discs. Taking advantage of the fact that the lid was off, I changed the seals of the water pump, which was losing a bit. the brass bushing that goes on the clutch lever and to finish the master cylinder rod. I have managed to make it go a little better, at least when putting gears it no longer does the typical cataclonk

Image

Enviat des del meu Redmi S2 usant Tapatalk
Well done :clap:

Chris.
User avatar
rollingthunderx2
Posts: 506
Joined: Fri Mar 04, 2011 12:12 am
Location: Hawick, scottish borders on A7

Re: hard clutch

Post by rollingthunderx2 »

To get a Honda no not Kelunk into first gear is a good job.
zakisbak
Posts: 79
Joined: Fri Jul 16, 2021 9:56 am
Location: London

Re: hard clutch

Post by zakisbak »

My clutch is like this too,and absolutely no free play.
My current solution is wrist braces,change gear less often,learn clutchless gear changes ........

Angling the levers forward and down so that the wrist/arm is a straight line didn't work:the clutch lever went from hard/no free play but smooth to hard/no free play and grabby sticky action.
Weirdly,the brake lever,which is fine,did the same,ie went from smooth to not smooth.

Odd.
My bars are non standard (maybe cbr600) and maybe the levers are too.

But can't see how dropping the levers forward and down could have this result.

The clutch isn't crazy hard and doesn't always cause wrist pain :think:
tony.mon
Posts: 16138
Joined: Wed Jul 25, 2007 10:46 pm
Location: Norf Kent

Re: hard clutch

Post by tony.mon »

Consider a dogleg lever- Titax are excellent but expensive.
Clean and lubricate the lever pivot, and if it's a cheap Chinese one, try an original to see if that makes a difference.

If all else fails, you can consider changing the master cylinder.
I fitted a radial MC from an RC8 (Magura) on my SP2 which made it smooth as silk with much less effort needed to pull it in, without reducing the amount of lift.

Sorry, but I didn't note the RC8 master cylinder diameter.
It's not falling off, it's an upgrade opportunity.
Post Reply