Recently purchased a '98 VTR. It came with aftermarket Remus exhausts high mounted which has eliminated the rear pegs.
![Image](https://i.postimg.cc/G8KqgFTT/Rear-left-side-small.jpg)
I considered spacers but the distance they would need to be at least 4.5 - 5 inches to get enough clearance which would provide too much flex to be safe.
![Image](https://i.postimg.cc/kRdqwd8g/Over-exhaust-with-measure-small.jpg)
Here's what the underside of the exhaust looks like.
![Image](https://i.postimg.cc/rdLBv9sf/Under-exhaust-small.jpg)
Has anyone on here managed to install rear pegs over high mount exhausts and got any tips? I have seen similar situation where someone has installed brackets to the bottom of the peg frame also but could not see what they were fixed to. It's probably gona be a no go but thought I'd ask.
Thanks