YES FREE I SAID FREE...ROLL UP ROLL UP...ACME INDUSTRIES INTERNATIONAL CORP.
MID SEASON GIVE AWAY TO MAKE ROOM FOR NEW STOCK...
All items below are free to who ever wants them just a few beer tokens required to cover postage...I'm not that generous...
Warning tool-o-philes need not apply as these are mostly cheap & cheerful bits & bobs.
However if you are tool-less, it's a start.
Spanner set 1...9,10,12/13,14,15,16/17,18/19,19/20 mm combination & open ended spanners.
Yes one is missing, 6mm gone to a good home.
Spanner set 2...9,10,10/11,10/12,13,14,16,14/17 mm comb & open spanners.
Selection of Imperial size sockets all 1/2 drive, sizes on request if anyone actually wants them.
Ideal if you happen to have a Rudgelyfarnswoth 650 single or a Shackleton Steamer in the shed.
Micrometer mm I think un-known make. Claimed...
Blowtorch head, this has a 10mm screw fitting, it fitted the gas bottle I had in the MacCave. Any DIY store sells the bottles, take this in with you to make sure it fits. I believe it is universal fitting size but you know what these manufactures are like they change things on purpose to make you buy complete new kit...
Remember all this stuff is free to whoever wants it as long as you supply beer tokens to cover the postage, the sockets are quite heavy...
Tools & bits...FREE !
Moderator: VTRDark
Tools & bits...FREE !
Last edited by MacV2 on Tue Aug 20, 2013 6:11 pm, edited 4 times in total.
Making up since 2007, sometimes it's true...Honest...
Re: Tools & bits...FREE !
Please can I have the Micrometer, a 6mm combo spanner and a 1/2 socket that fits the front wheel spindle bolt 22mm either 6 or 12pt but preferably 6pt. I could do with a 10mm 6pt 1/2 socket as well. Thanks
(:-})
(:-})
==============================Enter the Darkside
Re: Tools & bits...FREE !
Micrometer Yes.cybercarl wrote:Can I have the Micrometer, a 6mm combo spanner and a 1/2 socket that fits the front wheel spindle bolt 22mm either 6 or 12pt I could do with a 10mm 6pt 1/2 socket as well. Thanks
(:-})
Spanners were as a set but as it's you & as its a small size I'll let yo have it 6mm open/ring combo.
All those sockets are Imperial Carl but I'll have a look & see what fits, you want 1/2 drive...leave that with me.
You can pick these up when you come over for that cuppa...you better be brining the biscuits...
Making up since 2007, sometimes it's true...Honest...
Re: Tools & bits...FREE !
Nice one Macster. My 22mm socket has a split down the side
(:-})
(:-})
==============================Enter the Darkside
Re: Tools & bits...FREE !
Right Carlos...
1x Draper 22mm12pt 1/2'' drive socket. Yep fits front wheel spindle.
1x Taskmaster 10mm 6pt 1/2''drive socket.
1x Toolmac (not kidding ) 6mm combination spanner.
1x Micrometer.
Awaiting collection.
The metric sockets weren't in the free pile btw but you did me a favour with the spannering so gratis...
When you coming to get 'em...?
1x Draper 22mm12pt 1/2'' drive socket. Yep fits front wheel spindle.
1x Taskmaster 10mm 6pt 1/2''drive socket.
1x Toolmac (not kidding ) 6mm combination spanner.
1x Micrometer.
Awaiting collection.
The metric sockets weren't in the free pile btw but you did me a favour with the spannering so gratis...
When you coming to get 'em...?
Making up since 2007, sometimes it's true...Honest...
Re: Tools & bits...FREE !
Toolmac, is that's like Mac tools
Nice one, I shall be down once my bike is back up and running. I have the font head off at the mo.
(:-})
Nice one, I shall be down once my bike is back up and running. I have the font head off at the mo.
(:-})
==============================Enter the Darkside
Re: Tools & bits...FREE !
No Wucking Forries Carl I've put 'em aside for you...cybercarl wrote:Toolmac, is that's like Mac tools
Nice one, I shall be down once my bike is back up and running. I have the font head off at the mo.
(:-})
Making up since 2007, sometimes it's true...Honest...