VTR1000.ORG

So the bike isn't running correctly. The front cylender is only firing about 10 percent at idle and about half the time at 10-15 mph. The vacuum lines that used to run to the tank have been blocked off correctly, the tank has plenty of fuel, and the fuel tap is in the "on" position. During...

Took it outside for some pictures:

Agent, you have a pm waiting. Well, you will in a sec.

Your look a bit dear to me because they are in such good shape. I just need ones that fit the space.

The question is, who will sell them for the lowest? nt1980, how much you looking for?

Looking for the inner fairing pieces for the left side. The upper and lower pieces please. Any colour will do just as long as they fit like stock with no damage.

Thanks.

I think so. I havnt filled it up yet. I don't see a point till I'm ready to have it motd.

Waiting on fundage before I can get the mot done.

Yellow, black, purple and silver. Not completely random.

All together. Just ironing out a few more things. Still need turn signals -_-

The ones the multicolored bike had were glued to the fairing, in a somewhat permanent manner.

Ok, so the tap was off. The bike runs now but I need to give it some throttle to keep it running. I havnt done any idle adjustments. The only thing ive done that has anything to do with fuel (besides put a different tank on), is delete the return throttle cable. Pictures below is under the tank. The...

What time are you coming tomorrow Stuart?

I think I have the fuel tap in the off position. I'll be out in the garage tonight. So I'll troubleshoot it further.

I should have the bike fully together.

The two big hoses are connected correctly. That leaves a small hose connection and a slightly bigger hose connection. I connected the vacuum hose to the small hose connection. Is that right? Is the slightly larger hole the vent? After trying to run it, there is a hissing noise when opening the gas c...

Is that the hole on the top next to the main filler hole?