VTR1000.ORG

Cheers Del

looks like its going to get a good twatting then

Dom

Hi Trying to attempt fitting R&G bungs to my bike but am having probs at the first hurdle,Removing the engine bar, :( I have undone the nut & locking nut at both ends & put an allen key in to turn it but nothing?. Could anyone tell me is the bar threaded into the frame or do i just use a...

Thanks for the replies
Dom

Hi
Does anybody know where i can get the part No's for cylinder head gasket.
And any idea of price
Thanks

Pete This is so spooky, 8O Went to have a dynojet fitted last week & on the way there the bike started missing like a pig & down on power actually thought i,d burnt a valve,(always the pesimissed :cry: )anyway trundled to REPs in caldicot (very good :lol: ) & bike seemed to clear itself....

Ok here,s the story, Had the forks revalved by K-tech over the winter & also fitted a 43th tooth sprocket,Now i know the sprocket shortens the wheelbase, But between 80-100mph on quite soft bends the front end starts to weave a bit & it feels like it wants to tuck in, :cry: The front tyre is...

Del If blackstorm has a pattern for harris rearset heel guards could be the answer to the problem, Blackstorm I have a blade heel plate on the gear side that also is crap (to small)as my heel has pushed against the chain guard lovely V in it also its rubbing againt the tyre :( hence grooves in the h...

Cheers for the info
Dom

Cheers Vtrboy I don,t actually think there is a massive margin on the speedo :lol: Blackstorm with your rearsets do you find your heels digging into the tyre when on the twistys as both heels on my boots have big Vs in them :lol: (also ground away most of the chain guard) i,ve tried CBR heel plates ...

Del If you can make them what would be the approx cost ,As i ordered some from Harris about 3 months ago & still have,nt seen them. Also took your advice about sprockets & went out today for the 1st trip on a 43t back sprocket :lol: & u can feel the difference in the gearin almost immedi...

Warren
Cheers mate,
That's a fair amount of info to be getting on with'
I,m just looking for a spare set just for track use
thanks again
Dom

Does anybody know what wheels are compatable to the Vtr's
If any
Ta!
Dom

Hi
i agree with Darryl,
The tyre pressure is dictated by the road temp,make of tyre etc
In the Winter i run 40F 46R/summer 30F 38R which does give the tyres a bit of a hammering
so you do have to play around with pressures.

Dom

Rick

have you tried your gearing on a trackday as it sounds as if it,ll blow the doors off a blade /R1 on the twisty bits,

Thanks all for the info


Dom