VTR1000.ORG

Hello all, I've changed the friction plates with some EBC kind, and the problem is fixed! it goes into gear lovely and I can select neutral stopped from 1st and 2nd. I look at the old ones and I cant see anything wrong with them, I don't know what brand they are they look different to the EBC in mat...

And now you know

Any idea what its done for?

I'm guessing its still friction plates that are the problem, because it was correct before I took it apart and it was still grabbing (not sure why I didn't put the last friction disc back in the right place though )

Ahh

Ill change that tomorrow, must of been when I took it apart to clean them.

good spot chris

there’s something wrong with the discs, has to be ive taken the side case off and there is clear separation of the discs.



Ive uploaded a video on the tube

I’m using this oil, it’s semi synthetic. I had all the plates out and gave them a clean aswell.

I did this because when I first got the bike and tried rebleeding etc I thought maybe the plates could of been contaminated.

Hello again, What I’ve done, Back bled Taped the clutch lever back Dismantled and polished the slave cylinder Checked the push rod is straight Bled with the bike leant at extreme angles either way And after all that it’s still no better! Which is why I don’t know if it can be a bleeding issue if it ...

As in the long rod that goes through from the slave cylinder to the clutch basket?

Hello all, I've got a problem with my VTR1000 where the clutch drags even with the clutch lever pulled in. Its impossible to get into neutral without turning the bike off standing still, but you can sometimes moving. What I've done; Change oil for 10w-40 motorcycle oil (shell advance if you're inter...

Hello all, My names Tom, I'm based around Norwich in Norfolk. I've recently bought a red 1997 VTR. I'm really impressed with it and I can see why people don't part with them easily! Its neigh on standard apart from manual CCT's, handle bar risers and renthals which I like. What I've done so far is; ...