VTR1000.ORG

First I've heard of alarming engine noises, mine didn't make any noises when I ran a 4 degree advancer for several years. Except maybe through the Migs with no baffle material in... There's a cheap and easy option. Simply slot the holes in the ignition pickup. It can only change ignition timing acr...

Note I am running 11.3 CR pistons, but don´t think it will does much difference. I had to start the engine to get it work. I will talk more about it with him to see if there is some room for improvement, as 3-4k is not the best, the rest is running great. But this have to be done after pilot screw ...

IGNITION TIMING ... Ignition timing on the VTR 1000F as standard is set to fire the Spark Plug at 15° Before Top Dead Centre (BTDC) at idle as the Piston moves up on the Compression stroke and advances to 42° BTDC at 9,500 rpm. ... How do you know that its 42°? Where did you get that inforamtion fr...

Goal: I want to clone the original Honda ignition matrix in an Ignitech CDI. A little story: I have a VTR 1000 F (2001 with fuel gauge) and Ive read probbably all of 1000.org and Superhawk Forum about ignition timing and the +4 ignition advancer, pros and cons, what it does and the theories about t...

Hi, this post is really old but I need information about what I need to mount a Moriwaki belly pan. Can anyone of you guys provide pics/information/description/links about the bolts/metalstraps/etc. needed to mount a Moriwaki belly pan on a VTR 1000 F? @Jazzscot: You mad a mounting kit yourself? Can...

I know you asked about pyramid. I was thinking about that too. However I saw this one and didn't think they were too different. Big difference in price though so I bought it. It should be with me tomorrow with all required brackets etc. https://uploads.tapatalk-cdn.com/20170119/a733bee7edfb2cda4888...

How much is the cost?

EggShellBlond wrote: ↑Mon Feb 23, 2004 8:08 pm OK.....................I Quote from specification in Haynes

Valve Clearances ( COLD engine )
Intake valves 0.13 to 0.19mm
Exhaust valves 0.28 to 0.34 mm


...

I know the post is old, but can you guys confirm the numbers?