I'm sure the flow commander is a nice piece, but I know mine works and it's cheap. For me...nuff said.
AV
Search found 86 matches
- Wed Jan 06, 2021 12:20 am
- Forum: Bike Chat
- Topic: Bigger Bore Etc
- Replies: 58
- Views: 13453
- Sun Jan 03, 2021 2:01 pm
- Forum: General Test Area
- Topic: Cam chain tensioner
- Replies: 6
- Views: 4703
Re: Cam chain tensioner
Here's a link on how to rebuild your OEM unit, I can guide you on how to improve it for the sake of longevity if you like. If you go the manual route, I only recommend APE from direct experience. Just make sure you set the tension correctly and use green loctite on the CCT hardware or an equivalent....
- Fri Jan 01, 2021 7:55 pm
- Forum: Bike Chat
- Topic: Bigger Bore Etc
- Replies: 58
- Views: 13453
Re: Bigger Bore Etc
Ok, so, as far as the bore goes they are not coated in any way. They are an iron sleeve that is cast in place and could be bored out for a new sleeve but I think it would be a lot of effort without much gain. The bore is 1mm OS at 99mm and the pistons from JE are the same as they offer in the catalo...
- Mon Dec 14, 2020 5:03 pm
- Forum: Bike Chat
- Topic: Bigger Bore Etc
- Replies: 58
- Views: 13453
Re: Bigger Bore Etc
Just a quick update on all that has transpired: I have not had much time to get back on the dyno so I suspect that it will have to wait until spring. No big deal. The delwood stacks are a real nice addition and work quite well with a flow control and a DJ kit, it is definitely worth getting a set of...
- Thu Oct 29, 2020 10:22 pm
- Forum: Bike Chat
- Topic: Bigger Bore Etc
- Replies: 58
- Views: 13453
Re: Bigger Bore Etc
No joke, I'm salivating at the thought. But, I noticed today that I managed to complete an entire season of riding without breaking anything....So, I thought I might let it go for one more before I pull the motor. I added the delwood stacks a K&N and for kicks I added a dynojet kit that I had la...
- Thu Sep 03, 2020 11:58 pm
- Forum: Bike Chat
- Topic: Bigger Bore Etc
- Replies: 58
- Views: 13453
Re: Bigger Bore Etc
Cheers! It is coming along, I can't wait to fire it up with the high compression....
AV
AV
- Thu Sep 03, 2020 11:57 pm
- Forum: Bike Chat
- Topic: PAIR/PCV Mod
- Replies: 0
- Views: 1335
PAIR/PCV Mod
I had a little time recently to try a mod that is done on CBR's commonly and thought I'd share it. On the CBR it's a really easy affair to redirect the PCV to the PAIR. In doing this you reduce the internal airbox temps which I find to be around 107f normally and you still get a positive crankcase v...
- Tue Aug 25, 2020 1:39 pm
- Forum: Bike Chat
- Topic: Bigger Bore Etc
- Replies: 58
- Views: 13453
Re: Bigger Bore Etc
And here she is well under way again. The balanced assembly is back together and in the block with the 99mm JE's, happy as a clam. Everything is back from cryo treatment and the pistons have their ceramic coating on top for good measure. The RC trans is coming along nicely and I'm just waiting on so...
- Thu Jul 23, 2020 12:33 am
- Forum: Bike Chat
- Topic: Bigger Bore Etc
- Replies: 58
- Views: 13453
Re: Bigger Bore Etc
And another update... I got the rotating assembly back from the balancer today and I am pleased to report that it did not require much to make it balanced. A few grams here and there and all is right with the world. Oddly enough, this is the second time a VTR connecting rod was significantly differe...
- Fri Jun 12, 2020 6:59 pm
- Forum: Bike Chat
- Topic: Bigger Bore Etc
- Replies: 58
- Views: 13453
Re: Bigger Bore Etc
Alright here it is, I finally had a chance to get to the dyno and the results are in. Jetting is still way too fat so I'm working on that today but the hard numbers are: HP: 107.6 @ 8951 =+ 9 Hp Tq: 70 lb/ft @ 7050 rpm = +5 ftlb Essentially it is making more power and torque everywhere with respecta...
- Thu Jun 04, 2020 10:44 pm
- Forum: Bike Chat
- Topic: Known Cam Specs
- Replies: 23
- Views: 5549
Re: Known Cam Specs
Ok one last thing and I'll drop it... If anyone else were to offer engine building services or power adders and the like...they would be expected to show specifics such as cam specs, dyno sheets, compression ratio's, timing advance and so on. If they could not come up with that data, I can't imagine...
- Thu Jun 04, 2020 10:11 pm
- Forum: Bike Chat
- Topic: Known Cam Specs
- Replies: 23
- Views: 5549
Re: Known Cam Specs
Tough crowd...
- Thu Jun 04, 2020 9:22 pm
- Forum: Bike Chat
- Topic: Known Cam Specs
- Replies: 23
- Views: 5549
Re: Known Cam Specs
Oh well, can ya blame a guy for trying?
- Wed Jun 03, 2020 1:30 pm
- Forum: Bike Chat
- Topic: Known Cam Specs
- Replies: 23
- Views: 5549
Re: Known Cam Specs
With all due respect I believe you have an ethical responsibility to the members of this forum and others. The V has long been out of production and racing and I am certain that HRC could not possibly care less about it. To the point of technical data, you could certainly provide more than you have ...
- Fri May 29, 2020 1:06 am
- Forum: Bike Chat
- Topic: More fun calculations
- Replies: 6
- Views: 2172
Re: More fun calculations
With shipping it works out to about 10$ a bolt. If I remember correctly that's about 2$ more than the Honda bolts but that's not really the point. I think the OEM bolts are likely fine in most cases. I went with ARP because they are very high quality, affordable, and will ensure as much as possible ...