Page 2 of 2
Re: Yes or no to vinyl wrapping forks?
Posted: Tue Apr 25, 2017 2:41 pm
by mik_str
ultra-low, and they work great!
FYI, I cut them down by 20mm (10mm per side)
Re: Yes or no to vinyl wrapping forks?
Posted: Tue Apr 25, 2017 4:51 pm
by sirch345
mik_str wrote:ultra-low, and they work great!
FYI, I cut them down by 20mm (10mm per side)
That's sounds promising
as I have a pair of the ultra-low on order, although with my set-up I'm hoping I won't need to trim the fairing.
IIRC I think Popkat also mentioned cutting them down in length, so I'll bare that in mind
Thanks for the info, my apologies for the thread high-jack,
Chris.
Re: Yes or no to vinyl wrapping forks?
Posted: Tue Apr 25, 2017 4:59 pm
by mik_str
I trimmed the fairing just a little (have a close look at the pics and you`ll see that I simply trimmed the small downward protrusion, essentially keeping the line flowing right to the end). a quick cut with a hacksaw and I filed it smooth (you have to know it`s been done to even notice). Hoping this helps.
Re: Yes or no to vinyl wrapping forks?
Posted: Tue Apr 25, 2017 5:23 pm
by sirch345
mik_str wrote:I trimmed the fairing just a little (have a close look at the pics and you`ll see that I simply trimmed the small downward protrusion, essentially keeping the line flowing right to the end). a quick cut with a hacksaw and I filed it smooth (you have to know it`s been done to even notice). Hoping this helps.
I appreciate the advice Micky, thank you
I get what you mean about keeping the line flowing right to the end,
Chris.