I might not be able to repair this one.
I might not be able to repair this one.
I came over all enthusiastic this evening, and started to pull my engine apart.
I found these in the exhaust system:
The other bit of the valve head was sitting in the inlet tract under the carb.....
I may need a few parts.
I found these in the exhaust system:
The other bit of the valve head was sitting in the inlet tract under the carb.....
I may need a few parts.
It's not falling off, it's an upgrade opportunity.
- Miztaziggy
- Posts: 2451
- Joined: Fri Apr 15, 2011 9:15 pm
- Location: Tadcaster
Re: I might not be able to repair this one.
Well, although I can tell that doesn't look good, I don't know what that actually is....
Is that a valve?
Is that a valve?
Re: I might not be able to repair this one.
Mushrooms
That well and truly exploded. So how far down the exhaust did they end up.
(:-})
That well and truly exploded. So how far down the exhaust did they end up.
(:-})
==============================Enter the Darkside
Re: I might not be able to repair this one.
In the collector, under the engine.
They may have been travelling at a fair velocity......
They may have been travelling at a fair velocity......
It's not falling off, it's an upgrade opportunity.
- Hairy biker
- Posts: 366
- Joined: Tue May 07, 2013 8:33 pm
- Location: Newark
Re: I might not be able to repair this one.
Maybe your bike has decided to make itself one of those Yamaha ex-up valves
Of all the things I've lost I miss my mind the most
Re: I might not be able to repair this one.
Would have thought it was just a five min job for a man of your caliber tony
Hammer it flat weld it back together polish it up grind the seats back in and bobs your mothers brother
Lol
In the words of dirty harry “an mans got to know his limitations”
I’m assuming the head and pistons are a bit worse for were to
gotta say when you do a job u do it right m8
Hammer it flat weld it back together polish it up grind the seats back in and bobs your mothers brother
Lol
In the words of dirty harry “an mans got to know his limitations”
I’m assuming the head and pistons are a bit worse for were to
gotta say when you do a job u do it right m8
its big----- its red ------its throbbing and it’s a thousand CC
Re: I might not be able to repair this one.
Jeepers Tony, what kind of abuse were you giving that poor engine
- Saintsman27
- Posts: 727
- Joined: Wed Nov 07, 2012 9:28 pm
- Location: St Helens , Merseyside
Re: I might not be able to repair this one.
You been doing them Mexican explosions then ..
har
Alb
har
Alb
- lloydie
- Posts: 20921
- Joined: Mon Jan 17, 2011 11:16 pm
- Location: In the garage somewhere in Coventry
Re: I might not be able to repair this one.
sh1t ... hows the hi comp pistons ?
Re: I might not be able to repair this one.
Yeah that'll be alright nothing a dab of superglue wont cure...
Making up since 2007, sometimes it's true...Honest...
Re: I might not be able to repair this one.
I won't tony to post pictures of the rest of the engine once taken to pieces. The head is not going to look pretty.
Re: I might not be able to repair this one.
when ever has anyone says i want to see the head ended up pretty.
east london/essex [leyton ]
Re: I might not be able to repair this one.
Looks like its been chewed up and spat out!
What where you running it on AVGAS?
What where you running it on AVGAS?
Re: I might not be able to repair this one.
you will want to keep those bits, polished and mounted...........a memorial to your mechanical sympaty
AMcQ
Re: I might not be able to repair this one.
Might take a bit of polishing:
Well, as I always say, if you're gonna do it at all, do it properly.
Mind you, the front one is still ok....
Well, as I always say, if you're gonna do it at all, do it properly.
Mind you, the front one is still ok....
It's not falling off, it's an upgrade opportunity.