Bike update
-
- Posts: 479
- Joined: Wed Apr 10, 2013 10:11 am
- Location: Rugby warickshire
Bike update
Dealers had the bike a week he's stripped the carbs cleaned em all rebuilt no joy still losing power at 7000 revs so he's ordered new plugs which will be fitted today. I tried telling him to check timming but guess he's going to try everything else first lol. I'm happy for him to put as many new parts on as he wants as long as its fixed in the end.
- lloydie
- Posts: 20923
- Joined: Mon Jan 17, 2011 11:16 pm
- Location: In the garage somewhere in Coventry
Re: Bike update
And I hope you won't be charged for them !Gazfirestormowner wrote:Dealers had the bike a week he's stripped the carbs cleaned em all rebuilt no joy still losing power at 7000 revs so he's ordered new plugs which will be fitted today. I tried telling him to check timming but guess he's going to try everything else first lol. I'm happy for him to put as many new parts on as he wants as long as its fixed in the end.
Re: Bike update
What dealer are you getting it done at? Nightingales or Real motorcycles or?
Slowly approaching the more bikes than birthdays achievement
-
- Posts: 479
- Joined: Wed Apr 10, 2013 10:11 am
- Location: Rugby warickshire
Re: Bike update
Not charging me mate under warranty
Re: Bike update
If it's like a complete fall off of power at 7k then it's definatly timing 180 deg out. It's when the airbox runs out of capacity basically.
I wombles my timing up and it was very obvious drastic drop in power at ~7k
I wombles my timing up and it was very obvious drastic drop in power at ~7k
'98 VTR (Red - the quickest)
'94 KTM LC4 400e
'69 Land Rover S2 Lightweight
Trowbridge & Surrounding Areas Lawn Mower Servicing & Repairs
'94 KTM LC4 400e
'69 Land Rover S2 Lightweight
Trowbridge & Surrounding Areas Lawn Mower Servicing & Repairs
-
- Posts: 479
- Joined: Wed Apr 10, 2013 10:11 am
- Location: Rugby warickshire
Re: Bike update
I've told him to check timing but he's gunna go the long way round to get there but when he does do it I'm going to go watch what he does so I know what I'm doing when I do my cct mod
Re: Bike update
Print off the procedure on this site cause if he follows the haynes manual he will get it wrong againGazfirestormowner wrote:I've told him to check timing but he's gunna go the long way round to get there but when he does do it I'm going to go watch what he does so I know what I'm doing when I do my cct mod
-
- Posts: 479
- Joined: Wed Apr 10, 2013 10:11 am
- Location: Rugby warickshire
Re: Bike update
Well here's a quick update bike has now had new plugs coils full carb strip down clean and rebuild and bike is still the same. Dealer has now investigated and spoke to the bloke who he got the bike off and sure enough bike suffered a cct failure and never ran right after the rebuild. So he's spoke to a bloke who knows a bloke who knows someone that used to be a mechanic for Honda and sure enough he's said the timing will be out so he's now doing the timing lol. Congrats to all u wizz kids that knew it was that when I asked all them weeks ago. The bloke said it will be one tooth out is that enough to make it 180 degrees like u guys said it was. Any way thanx for your help guys I'm hoping to get the bike back on Tuesday now and I can enjoy the weather .
- agentpineapple
- Posts: 15124
- Joined: Sat Mar 26, 2011 9:16 pm
Re: Bike update
no mate, one tooth woulded make that much of a difference, 180 degrees is half a turn on the engine, if he does one tooth the problem will still be there
HEY YOU GUYS!!!!!!
Re: Bike update
he took his time but got there in the end.
as said, its not one tooth on the cam, its 1 turn on the crank
as said, its not one tooth on the cam, its 1 turn on the crank
AMcQ
Re: Bike update
How funny that they would not listen to you when you asked them to check the timing. Makes me laugh that even a Honda dealers get it wrong. Well at least you have other bits done for nothing.
(:-})
(:-})
==============================Enter the Darkside