is there anyone who can help me?????????????????????????????

General Bike chat
Post Reply
Ronald T.
Posts: 3
Joined: Wed Sep 17, 2003 4:40 am
Location: united states, Massachusetts

is there anyone who can help me?????????????????????????????

Post by Ronald T. »

:?: in searching for the tightest under the fender exhaust available for my 1998 superhawk, i came across an obscure but good looking brand of slip on called carbon force In america, nobody knows of them but I have a picture so I know they exsist. I have the picture but i am not quite sure how to send attachments on this post..... help.... some one must know of them across the river. please help, they look almost as tight as the old ducati 916 cans.

ronnie t, signing out........... [/img]
User avatar
DD
Posts: 160
Joined: Tue Jun 10, 2003 9:22 am
Location: Christchurch new zealand

Post by DD »

I havent heard of em sorry.

But as far as posting a pic try this, However you can only do it if the pic is on a www site somewere. If you want you can email the pic to me and I will put it on my web site and post it here for you.

Right click on the pic- go down to properties- Left click- then copy the URL (by right clicking)

When you are writing a post out and are ready to post the pic then
click on the 'Img' button (below subject line)
then past the URL (right click)
then click on the 'Img' button again
thats it all done I havent done it on this forum so I'll give it ago
[img]http://community.webshots.com/s/image9/ ... RST_ph.jpg
[/img]
cheers Darryl
User avatar
DD
Posts: 160
Joined: Tue Jun 10, 2003 9:22 am
Location: Christchurch new zealand

Post by DD »

Ok...... I stand corrected it looks like ya cant do it here even though I use the same forum lay out with 2 Moto Guzzi sites were it does work.
cheers Darryl
User avatar
sproutout
Posts: 36
Joined: Tue Sep 16, 2003 10:00 pm
Location: Swansea
Contact:

Post by sproutout »

no your instructions are right u do it like that - u just have put an extra space in the url before the last image quotes so it wont work

here you go

Image
Too much ambition results in promotion to a job you cant do!!!
User avatar
DD
Posts: 160
Joined: Tue Jun 10, 2003 9:22 am
Location: Christchurch new zealand

Post by DD »

Sweeeeet...... but weres that space ment to be, after jpg and before [/img] or am I still all cocked up :?

thanks for that aye :oops:

well now that the pic is there for those that arnt fimiler with Biomto that little sucker is the best handling bke I've ridden and the fastest single aswell you can get a inj kit for it but that one still runs twin carbs and a under seat pipe with two outlets.
cheers Darryl
MDJ
Posts: 227
Joined: Thu Apr 22, 2004 9:56 am
Location: Worcester park, surrey, London

No...

Post by MDJ »

Ah ah ahhh! Kaz, you must mean CIF, the houshold cream cleaner right? but how do I get that down the pfone line and onto the internet? :confused
I got knocked down, but i'll get up again and you'll never ever keep me down!
User avatar
thehazmatguy
Posts: 74
Joined: Thu May 08, 2003 5:58 am
Location: Phoenix, Arizona, USA
Contact:

Re: is there anyone who can help me?????????????????????????

Post by thehazmatguy »

Ronald T. wrote::?: in searching for the tightest under the fender exhaust available for my 1998 superhawk, i came across an obscure but good looking brand of slip on called carbon force In america, nobody knows of them but I have a picture so I know they exsist. I have the picture but i am not quite sure how to send attachments on this post..... help.... some one must know of them across the river. please help, they look almost as tight as the old ducati 916 cans.

ronnie t, signing out........... [/img]
Is it a tighter fit than the wolf undertail pipes??
You know the Austin Powers movies? I have always wanted to date someone like Allota Fagina... but I always seem to date her sister Sandy.
--------------------------------------
User avatar
Rollingalong
Posts: 11
Joined: Fri Oct 15, 2004 6:30 pm

Post by Rollingalong »

Look at the custom exhaust this company is doing . Pretty wild .

http://www.zorstec.net/
Anonymous

Post by Anonymous »

i couldnt find one that i liked so i did it myself
http://spaces.msn.com/firestormriders/P ... 02_owner=1
User avatar
yellafella
Posts: 1276
Joined: Tue Sep 21, 2004 9:58 am
Location: Middlesbrough

Post by yellafella »

Very very nice !!!!!!!!!!!!!!!!!!!!!! :D :D :D :D
Excellent job !!!!!!!!!!!!! :D :D :D :D
Image
Post Reply