Have subframe off, so checking wiring have notice the 3 yellow wires R/R connector block under seat in plastic cover are a little scorched ok at R/R end, would like to cut back the scorched wire and fit a new connector block. After reading most of the R/R posts the 3 yellow wires can be connected anyway?
But what block connector would this one work?
https://kojaycat.co.uk/epages/950000457 ... 3W-CNA-WHT
Everything is working as expected charging ok, it/s 2002 f2 finned type R/R.
So many questions just wish I had the answers, but this forum always has.
Block connector R/R
Block connector R/R
Storming About
Re: Block connector R/R
Yeah scrap it & fit a MOSSFET R/R...
Making up since 2007, sometimes it's true...Honest...
Re: Block connector R/R
A few links you may or may not have already seen:
http://www.vtr1000.org/phpBB3/viewtopic ... 84#p351482
https://www.superhawkforum.com/forums/k ... how-25117/
Chris.
http://www.vtr1000.org/phpBB3/viewtopic ... 84#p351482
https://www.superhawkforum.com/forums/k ... how-25117/
Chris.
Re: Block connector R/R
Now thats a good read sirch345 so i will change to a more rebust R/R in the mean time as in my OP can the 3 yellow wires be but anyway round in a new block connector and is the connector ok i linked in the OP?sirch345 wrote: ↑Wed Oct 27, 2021 7:48 pm A few links you may or may not have already seen:
http://www.vtr1000.org/phpBB3/viewtopic ... 84#p351482
https://www.superhawkforum.com/forums/k ... how-25117/
Chris.
Storming About
Re: Block connector R/R
Yes 3 yella any order.. Red & green need to be fitted to the correct terminals so make a note of which way they fit...mjvw wrote: ↑Fri Oct 29, 2021 8:38 amNow thats a good read sirch345 so i will change to a more rebust R/R in the mean time as in my OP can the 3 yellow wires be but anyway round in a new block connector and is the connector ok i linked in the OP?sirch345 wrote: ↑Wed Oct 27, 2021 7:48 pm A few links you may or may not have already seen:
http://www.vtr1000.org/phpBB3/viewtopic ... 84#p351482
https://www.superhawkforum.com/forums/k ... how-25117/
Chris.
Making up since 2007, sometimes it's true...Honest...
Re: Block connector R/R
Cheers much appreciated just going to purchase new connector bock new for now new R/R later.
Storming About
Re: Block connector R/R
As Mac says, anyway around for those three yellow wires from the alternator is fine.mjvw wrote: ↑Fri Oct 29, 2021 8:38 amNow thats a good read sirch345 so i will change to a more rebust R/R in the mean time as in my OP can the 3 yellow wires be but anyway round in a new block connector and is the connector ok i linked in the OP?sirch345 wrote: ↑Wed Oct 27, 2021 7:48 pm A few links you may or may not have already seen:
http://www.vtr1000.org/phpBB3/viewtopic ... 84#p351482
https://www.superhawkforum.com/forums/k ... how-25117/
Chris.
As for the new connector block, it states it's meant for alternator use so I'm guessing it should be fine, plus it shows on Kojaycat's site one for a Fireblade using the same size terminals. You'll just need a crimping tool
Chris.
Re: Block connector R/R
Thanks have ordered from another supplier plus some petrol pipe clips. Seemed to be a better price FYI
.
Storming About