Surely he can root with the little finger on the good hand?
Rev 3
Re: Rev 3
The new oil pump finally arrived so got a little bit done today. Fitted the flywheel cover and oil pan (after installing the pump ) and cleaned the header and mounted it along with the starter.
Which leaves installing the clutch and all those bits, so I can mount that cover and then figure out where to mount the oil cooler.
Which leaves installing the clutch and all those bits, so I can mount that cover and then figure out where to mount the oil cooler.
Loud pipes don't save lives, knowing how to ride your bike will save your life.
- Pete.L
- Forum Health And Safety Officer
- Posts: 7222
- Joined: Fri Sep 26, 2003 5:09 pm
- Location: Bristol
Re: Rev 3
Shiny!
Looks like you're on the home stretch now.
It's going to be like having a new bike after all the work is done. A new bike that fits like an old glove
Pete.l
Looks like you're on the home stretch now.
It's going to be like having a new bike after all the work is done. A new bike that fits like an old glove
Pete.l
My new ride is a bit of a Howler and I love to make her Squeal
Re: Rev 3
How’s your recovery going? Bike looks good
Carpe diem, quam minimum credula postero
F3, 954 USD front, K Tech springs, Braced swinger, Penske shock, Six spoke Mockesini wheels, Harris rearsets, QaT, Flywheel diet!, A&L stacks, stick coils, K&N, FP Ti jets, lashings of Ti & CF
F3, 954 USD front, K Tech springs, Braced swinger, Penske shock, Six spoke Mockesini wheels, Harris rearsets, QaT, Flywheel diet!, A&L stacks, stick coils, K&N, FP Ti jets, lashings of Ti & CF
Re: Rev 3
Good news, we’ll done
Carpe diem, quam minimum credula postero
F3, 954 USD front, K Tech springs, Braced swinger, Penske shock, Six spoke Mockesini wheels, Harris rearsets, QaT, Flywheel diet!, A&L stacks, stick coils, K&N, FP Ti jets, lashings of Ti & CF
F3, 954 USD front, K Tech springs, Braced swinger, Penske shock, Six spoke Mockesini wheels, Harris rearsets, QaT, Flywheel diet!, A&L stacks, stick coils, K&N, FP Ti jets, lashings of Ti & CF
Re: Rev 3
Well it has been a little while so time for an update..... Decided to run a Mocal 7 row oil cooler so got it fitted and then built some braided SS lines for it.
Also have a few more bits fitted
and the send and return lines
and with the rads fitted:
Now waiting on the proper coolant hose kit....can't use the RC51 kit I was sent...
Also have a few more bits fitted
and the send and return lines
and with the rads fitted:
Now waiting on the proper coolant hose kit....can't use the RC51 kit I was sent...
Last edited by 8541Hawk on Mon Jul 12, 2021 3:26 pm, edited 1 time in total.
Loud pipes don't save lives, knowing how to ride your bike will save your life.