Bits n Bobs Parts For Sale...
Moderator: VTRDark
Bits n Bobs Parts For Sale...
Come on down parts sale all stock must go to make room for fresh deliverys...
First come, first dibs by time of post or direct PM...Frank will be watching...
Phone holder with mount for stearing stem...Think its for an i-phone but has a foam inner which could be altered to fit other phones...
The space in side the foam is 150 x 70mm. £5 + shipping.
Renthal Utra low bars... 758 Drilled for Storm control lugs...SOLD
Re padded & re covered Std seat...Coverd with alcantara type meterial which whilst claims it's showerproof definitely ain't waterproof, I have used this on one of my bikes & I know it holds water when it gets a good soaking... The rear part is darker as it's not sun faded due to having a seat hump on. Small tare/wear on front right corner, I can supply a patch to repair this if required.... £25 + shipping.
Alternator cover c/w coil, few marks to cover but no road rash, coils all fairly good colour no blacking...SOLD
So the rest of it...
Pair front footrest hangers compleate...£60 + shipping ( back up for sale as FB messer has not been back in touch...)
Starter motor, untested could do with a refurb as bolt is a bit coroded... £10 + shipping.
Sprocket carrier...SOLD
1x Rear down pipe...£5 + shipping.
Rear brake carrier...SOLD
Pair small flush mount indis...£5 + shipping
2x Short velocity stack, all tabs & screws good order...£5 each+ shipping
2x std fork top shrouds...£5 the pair + shipping
Aftermarket LED rear light, will not fit std bodywork but might do some one a turn if doing a bobber/hack job or something... £5 + shipping
Snail type horn...£3 + shipping
Std horn... £2.50 + shipping
2x std indi relays...£2.50 each+ shipping
1x carb rubber... £2.50 + shipping
Petcock rubber shroud thingy...£3 posted UK mainland...
Following items are free if anyone wants them, cover shipping costs...
CBR 600 ? front brake lever...CLAIMED...
All items where shipping required Std PO rates upto 2kg small parcle £2.95
Over 2kg I will get a quote before sending...
First come, first dibs by time of post or direct PM...Frank will be watching...
Phone holder with mount for stearing stem...Think its for an i-phone but has a foam inner which could be altered to fit other phones...
The space in side the foam is 150 x 70mm. £5 + shipping.
Renthal Utra low bars... 758 Drilled for Storm control lugs...SOLD
Re padded & re covered Std seat...Coverd with alcantara type meterial which whilst claims it's showerproof definitely ain't waterproof, I have used this on one of my bikes & I know it holds water when it gets a good soaking... The rear part is darker as it's not sun faded due to having a seat hump on. Small tare/wear on front right corner, I can supply a patch to repair this if required.... £25 + shipping.
Alternator cover c/w coil, few marks to cover but no road rash, coils all fairly good colour no blacking...SOLD
So the rest of it...
Pair front footrest hangers compleate...£60 + shipping ( back up for sale as FB messer has not been back in touch...)
Starter motor, untested could do with a refurb as bolt is a bit coroded... £10 + shipping.
Sprocket carrier...SOLD
1x Rear down pipe...£5 + shipping.
Rear brake carrier...SOLD
Pair small flush mount indis...£5 + shipping
2x Short velocity stack, all tabs & screws good order...£5 each+ shipping
2x std fork top shrouds...£5 the pair + shipping
Aftermarket LED rear light, will not fit std bodywork but might do some one a turn if doing a bobber/hack job or something... £5 + shipping
Snail type horn...£3 + shipping
Std horn... £2.50 + shipping
2x std indi relays...£2.50 each+ shipping
1x carb rubber... £2.50 + shipping
Petcock rubber shroud thingy...£3 posted UK mainland...
Following items are free if anyone wants them, cover shipping costs...
CBR 600 ? front brake lever...CLAIMED...
All items where shipping required Std PO rates upto 2kg small parcle £2.95
Over 2kg I will get a quote before sending...
Last edited by MacV2 on Sat Nov 17, 2018 10:57 am, edited 5 times in total.
Making up since 2007, sometimes it's true...Honest...
Re: Bits n Bobs Parts For Sale...
Some good prices there Mac
GLWS
Chris.
GLWS
Chris.
Re: Bits n Bobs Parts For Sale...
Is there the black plastic cap that goes in the top of the steering stem in among that lot ? good condition with no scratches of course
.
.
http://www.bidefordmotorcycles.co.uk
2014 CRMC Post classic Superbike champion.
2014 CRMC Post classic senior production champion. On a Suzuki Katana 1100
My bikes, Firestorm, Suzuki GSX-s1000 Katana, VFR800Fi. Projects, 1986 popup Katana, 3 XJ600’s
2014 CRMC Post classic Superbike champion.
2014 CRMC Post classic senior production champion. On a Suzuki Katana 1100
My bikes, Firestorm, Suzuki GSX-s1000 Katana, VFR800Fi. Projects, 1986 popup Katana, 3 XJ600’s
Re: Bits n Bobs Parts For Sale...
I might have one somewhere...will get Frank to check...
Making up since 2007, sometimes it's true...Honest...
Re: Bits n Bobs Parts For Sale...
And a good undamaged handlebar end weight
.
http://www.bidefordmotorcycles.co.uk
2014 CRMC Post classic Superbike champion.
2014 CRMC Post classic senior production champion. On a Suzuki Katana 1100
My bikes, Firestorm, Suzuki GSX-s1000 Katana, VFR800Fi. Projects, 1986 popup Katana, 3 XJ600’s
2014 CRMC Post classic Superbike champion.
2014 CRMC Post classic senior production champion. On a Suzuki Katana 1100
My bikes, Firestorm, Suzuki GSX-s1000 Katana, VFR800Fi. Projects, 1986 popup Katana, 3 XJ600’s
Re: Bits n Bobs Parts For Sale...
Forgot about this & I was in the cave today...oops! sorry...
As for the end weights I'll have to check...Not 100% sure I have a decent one as I was feking about trying to sort out the bar end on Custurd the other week...The last fall had bent the screw...& the previous fall snapped the inner weight off...
Making up since 2007, sometimes it's true...Honest...
Re: Bits n Bobs Parts For Sale...
MacV2 wrote: ↑Sat Oct 13, 2018 5:28 pm
Forgot about this & I was in the cave today...oops! sorry...
As for the end weights I'll have to check...Not 100% sure I have a decent one as I was feking about trying to sort out the bar end on Custurd the other week...The last fall had bent the screw...& the previous fall snapped the inner weight off...
No worries not a mega rush, I scuffed my right bar weight when I borrowed it on to the race bike and had a little tip off last year, after that I put different type of bar ends on but had to put the original back on my storm, so it looks like I've crashed that one when I haven't. It's just a little scuffed that's all but it notices.
The Plastic cap/bung is for my VFR road bike which it's missing from and 99% sure it's exactly the same part numbers.
.
http://www.bidefordmotorcycles.co.uk
2014 CRMC Post classic Superbike champion.
2014 CRMC Post classic senior production champion. On a Suzuki Katana 1100
My bikes, Firestorm, Suzuki GSX-s1000 Katana, VFR800Fi. Projects, 1986 popup Katana, 3 XJ600’s
2014 CRMC Post classic Superbike champion.
2014 CRMC Post classic senior production champion. On a Suzuki Katana 1100
My bikes, Firestorm, Suzuki GSX-s1000 Katana, VFR800Fi. Projects, 1986 popup Katana, 3 XJ600’s
Re: Bits n Bobs Parts For Sale...
Malc O'Pop... incoming PM...
Making up since 2007, sometimes it's true...Honest...
Re: Bits n Bobs Parts For Sale...
http://www.bidefordmotorcycles.co.uk
2014 CRMC Post classic Superbike champion.
2014 CRMC Post classic senior production champion. On a Suzuki Katana 1100
My bikes, Firestorm, Suzuki GSX-s1000 Katana, VFR800Fi. Projects, 1986 popup Katana, 3 XJ600’s
2014 CRMC Post classic Superbike champion.
2014 CRMC Post classic senior production champion. On a Suzuki Katana 1100
My bikes, Firestorm, Suzuki GSX-s1000 Katana, VFR800Fi. Projects, 1986 popup Katana, 3 XJ600’s
- freeridenick
- Posts: 1584
- Joined: Fri May 23, 2014 1:30 pm
- Location: Derbyshire
Re: Bits n Bobs Parts For Sale...
PM on its way Mac.
Re: Bits n Bobs Parts For Sale...
PM back at ya...
Making up since 2007, sometimes it's true...Honest...
Re: Bits n Bobs Parts For Sale...
Updated...
Franks been busy today large order going out to Sweeden...
Franks been busy today large order going out to Sweeden...
Making up since 2007, sometimes it's true...Honest...
Re: Bits n Bobs Parts For Sale...
Will the flush fit indis fit the standard front fairings Mac?
Re: Bits n Bobs Parts For Sale...
I dunno...I 'll have a look & get back to ya...
Making up since 2007, sometimes it's true...Honest...