Reculator/Rectifier
-
- Posts: 14
- Joined: Sun Aug 12, 2018 3:20 pm
Reculator/Rectifier
Hi my VTR knowledge library:)
I'm planning on upgrading the regulator before i blows up. What is your best advise to buy, when also it should be easy to fit and install?
BR
Simon
I'm planning on upgrading the regulator before i blows up. What is your best advise to buy, when also it should be easy to fit and install?
BR
Simon
Re: Reculator/Rectifier
Look for Mosfet FH020 either new or on some newer Yamahas - Not a plug&play mod as wiring / soldering / crimping tools & skills required.
http://www.vtr1000.org/phpBB3/viewtopic ... 82#p351482
https://easternbeaver.com/Main/Elec__Pr ... ctors.html
https://www.ebay.co.uk/itm/yamaha-mt09- ... Swiu5bM5RS
Avoid cheap new Chinese copies.
http://www.vtr1000.org/phpBB3/viewtopic ... 82#p351482
https://easternbeaver.com/Main/Elec__Pr ... ctors.html
https://www.ebay.co.uk/itm/yamaha-mt09- ... Swiu5bM5RS
Avoid cheap new Chinese copies.
It may be that your whole purpose in life is simply to serve as a warning to others.
VTR Firestorm and other bikes t-shirts
VTR Firestorm and other bikes t-shirts
-
- Posts: 14
- Joined: Sun Aug 12, 2018 3:20 pm
Re: Reculator/Rectifier
Thx for the reply, I'll have a look at it. WHat's wrong with just buying a new one, which is suited for the VTR?
Re: Reculator/Rectifier
Later model Storms were fitted with an 'improved' finned version reg/rec. Reg /rec's produce heat as a by product of what they do, over time this can cause a melt down of the unit, burnt wires & conectors, worse it over charges the battery wich can bulge or even catch fire... The fin's are there to help with cooling but they can still fail.vestphaelpower wrote: ↑Fri Aug 24, 2018 9:59 pm Thx for the reply, I'll have a look at it. WHat's wrong with just buying a new one, which is suited for the VTR?
Newer technology in a Mossfet type reg/rec produces far less heat so aleviate the issues.
I've used BMW S1000r reg/rec with no issues.
It's not just Storms that suffer this 80's Hondas all use the same reg/rec & all suffer the same issue...
Making up since 2007, sometimes it's true...Honest...
-
- Posts: 14
- Joined: Sun Aug 12, 2018 3:20 pm
Re: Reculator/Rectifier
Thx for your explanation! I guess I'll have a look around, and add this mod to my vinter updates:)
-
- Posts: 14
- Joined: Sun Aug 12, 2018 3:20 pm
Re: Reculator/Rectifier
Will this rectifier do? It has cooling fins and should be a perfect fit? I guess it's not MOSFET, but still...MacV2 wrote: ↑Sat Aug 25, 2018 12:07 amLater model Storms were fitted with an 'improved' finned version reg/rec. Reg /rec's produce heat as a by product of what they do, over time this can cause a melt down of the unit, burnt wires & conectors, worse it over charges the battery wich can bulge or even catch fire... The fin's are there to help with cooling but they can still fail.vestphaelpower wrote: ↑Fri Aug 24, 2018 9:59 pm Thx for the reply, I'll have a look at it. WHat's wrong with just buying a new one, which is suited for the VTR?
Newer technology in a Mossfet type reg/rec produces far less heat so aleviate the issues.
I've used BMW S1000r reg/rec with no issues.
It's not just Storms that suffer this 80's Hondas all use the same reg/rec & all suffer the same issue...
https://www.ebay.co.uk/itm/MS-Rectifier ... Swv-NWZqgm
Re: Reculator/Rectifier
Yes but I would imagine it's just a cheapo Chinese copy sold by mr Pole after adding a few quid on top...To be fair these days, BMW, Honda et all have all thire electrical componants made in China * for cost reasons...but they quality control is probably of a much higher standard in the plants they use.vestphaelpower wrote: ↑Sat Aug 25, 2018 5:09 amWill this rectifier do? It has cooling fins and should be a perfect fit? I guess it's not MOSFET, but still...MacV2 wrote: ↑Sat Aug 25, 2018 12:07 amLater model Storms were fitted with an 'improved' finned version reg/rec. Reg /rec's produce heat as a by product of what they do, over time this can cause a melt down of the unit, burnt wires & conectors, worse it over charges the battery wich can bulge or even catch fire... The fin's are there to help with cooling but they can still fail.vestphaelpower wrote: ↑Fri Aug 24, 2018 9:59 pm Thx for the reply, I'll have a look at it. WHat's wrong with just buying a new one, which is suited for the VTR?
Newer technology in a Mossfet type reg/rec produces far less heat so aleviate the issues.
I've used BMW S1000r reg/rec with no issues.
It's not just Storms that suffer this 80's Hondas all use the same reg/rec & all suffer the same issue...
https://www.ebay.co.uk/itm/MS-Rectifier ... Swv-NWZqgm
Have a good look around on e-bay & spend a bit more to buy a known genuine fittment s/h unit.
Look for any that have the additional brackets on them, then you know it's come off a bike... Like this one...
https://www.ebay.co.uk/itm/BMW-S1000RR- ... Swbf5bUgiI
This one is cheapest gen one on ebay ATM...Be quick as that is cheap & I might buy it...
https://www.ebay.co.uk/itm/BMW-S1000RR- ... Swl71bYi9d
Now you can buy fitting kits for these but it's easy enough to fit without them. As long as the conection block on your R/R hasnt suffered from any scorching you can unpick the conectors from the block. Put some heat shrink over the bear metal bits & plug them straight in. 3x Yellow wires can go on in any order but the red & green must be fitted the same as they came on the one your taking off...IIRC green is right,red is left...
This is one i fitted to one of my bikes with a fitting kit...
This one as fitted to my F2 less room so no fitting kit, dry fit prior to heat shrink.
The only other issue is you will have to relocate the flasher relay, I just move mine to the inside of the rail & zip tie on...
*They use Chinese factories mainly for cost but also as they use kids so smaller hands plus the added benifit that they dont need to squint to see fine details**...
**allegedly... OK I may have made that up...
Making up since 2007, sometimes it's true...Honest...
-
- Posts: 14
- Joined: Sun Aug 12, 2018 3:20 pm
Re: Reculator/Rectifier
Thank you so much for your very detailed answer! I look forward to get it replaced
Re: Reculator/Rectifier
just to confuse it,as is my way, iv been using tourmax units for over 5 years now, they look just like a finned storm unit but iv never had any problems so far..
the older i get,the faster i was
-
- Posts: 14
- Joined: Sun Aug 12, 2018 3:20 pm
Re: Reculator/Rectifier
vestphaelpower wrote: ↑Sun Aug 26, 2018 10:32 amHi, where can I buy these units? And do they fit without having to modify the pins?
https://www.ebay.co.uk/itm/Motor-Voltag ... SwDtRbctE4
Cheap is as cheap as...
Ya pays your money...ect ect
Making up since 2007, sometimes it's true...Honest...
Re: Reculator/Rectifier
Yeah but your a well know tightarse...Who needs a belt when a bit of bailing wire will do...
Fabio yesterday with his Mrs...*
*Sorry Mrs Fab's...
Making up since 2007, sometimes it's true...Honest...
Re: Reculator/Rectifier
Because they are still old style diode based and they fail as often as they can just to aggravate riders and remind them that a new part is not always a better part, when new is just old in new wrappervestphaelpower wrote: ↑Fri Aug 24, 2018 9:59 pm Thx for the reply, I'll have a look at it. WHat's wrong with just buying a new one, which is suited for the VTR?
https://www.superhawkforum.com/forums/g ... r-r-24798/
https://www.superhawkforum.com/forums/m ... r-r-34077/
https://www.superhawkforum.com/forums/k ... way-34876/
Marquez Motorcycle Services
Solutions to recurring maintenance
Race/Adventure ride event prep
Post event services
Total Rider
Your path to a TX motorcycle license
And advanced Rider training
Solutions to recurring maintenance
Race/Adventure ride event prep
Post event services
Total Rider
Your path to a TX motorcycle license
And advanced Rider training
-
- Posts: 14
- Joined: Sun Aug 12, 2018 3:20 pm
Re: Reculator/Rectifier
Thx pall! I guess I will go for the MOSFET solution. I really appreciate your answersE.Marquez wrote: ↑Sun Aug 26, 2018 1:24 pmBecause they are still old style diode based and they fail as often as they can just to aggravate riders and remind them that a new part is not always a better part, when new is just old in new wrappervestphaelpower wrote: ↑Fri Aug 24, 2018 9:59 pm Thx for the reply, I'll have a look at it. WHat's wrong with just buying a new one, which is suited for the VTR?
https://www.superhawkforum.com/forums/g ... r-r-24798/
https://www.superhawkforum.com/forums/m ... r-r-34077/
https://www.superhawkforum.com/forums/k ... way-34876/
Re: Reculator/Rectifier
the older i get,the faster i was