Part Recognition service...
Part Recognition service...
Ok so in the haul of bits I picked up yesterday is this...
It's not a Storm specific one but I will have a play & see if it will fit... I doubt any of the mounts will line up tho...
AnyHooo any one have a clue as to what it is from.
I'll have a look over at Pyramid & see If I can match it up...
It's not a Storm specific one but I will have a play & see if it will fit... I doubt any of the mounts will line up tho...
AnyHooo any one have a clue as to what it is from.
I'll have a look over at Pyramid & see If I can match it up...
Making up since 2007, sometimes it's true...Honest...
Re: Part Recognition service...
Well that didnt take long...
https://www.pyramid-plastics.co.uk/acce ... ber=07106A
Fat lot of good you lot were...
https://www.pyramid-plastics.co.uk/acce ... ber=07106A
Fat lot of good you lot were...
Making up since 2007, sometimes it's true...Honest...
Re: Part Recognition service...
I was going to say Fireblade. I haven't looked at the link yet so it's still a valid guess based on the shape..
I'll look at the link now
.
I'll look at the link now
.
http://www.bidefordmotorcycles.co.uk
2014 CRMC Post classic Superbike champion.
2014 CRMC Post classic senior production champion. On a Suzuki Katana 1100
My bikes, Firestorm, Suzuki GSX-s1000 Katana, VFR800Fi. Projects, 1986 popup Katana, 3 XJ600’s
2014 CRMC Post classic Superbike champion.
2014 CRMC Post classic senior production champion. On a Suzuki Katana 1100
My bikes, Firestorm, Suzuki GSX-s1000 Katana, VFR800Fi. Projects, 1986 popup Katana, 3 XJ600’s
Re: Part Recognition service...
And now I can be all smug..
If you hadn't have been so impatient when you asked I would have replied before you put the link up
I only have the one hand to use so it's one finger tapping rather than 2
.
If you hadn't have been so impatient when you asked I would have replied before you put the link up
I only have the one hand to use so it's one finger tapping rather than 2
.
http://www.bidefordmotorcycles.co.uk
2014 CRMC Post classic Superbike champion.
2014 CRMC Post classic senior production champion. On a Suzuki Katana 1100
My bikes, Firestorm, Suzuki GSX-s1000 Katana, VFR800Fi. Projects, 1986 popup Katana, 3 XJ600’s
2014 CRMC Post classic Superbike champion.
2014 CRMC Post classic senior production champion. On a Suzuki Katana 1100
My bikes, Firestorm, Suzuki GSX-s1000 Katana, VFR800Fi. Projects, 1986 popup Katana, 3 XJ600’s
Re: Part Recognition service...
Thanks for you help anyway...wanna buy it ?
Making up since 2007, sometimes it's true...Honest...
Re: Part Recognition service...
No, I get them cheap from Pyramid anyway and I don't have a blade
Sell it to the little Irish chappy, he buys anything that might fit a storm
.
Sell it to the little Irish chappy, he buys anything that might fit a storm
.
http://www.bidefordmotorcycles.co.uk
2014 CRMC Post classic Superbike champion.
2014 CRMC Post classic senior production champion. On a Suzuki Katana 1100
My bikes, Firestorm, Suzuki GSX-s1000 Katana, VFR800Fi. Projects, 1986 popup Katana, 3 XJ600’s
2014 CRMC Post classic Superbike champion.
2014 CRMC Post classic senior production champion. On a Suzuki Katana 1100
My bikes, Firestorm, Suzuki GSX-s1000 Katana, VFR800Fi. Projects, 1986 popup Katana, 3 XJ600’s
Re: Part Recognition service...
Which one there all around 4' nothing...
Making up since 2007, sometimes it's true...Honest...
Re: Part Recognition service...
oh yeah go on. take the piss ya bunch of coonts lol ...actually that mite fit mine lol..
never mind that tosh get the juicy bits for sale
never mind that tosh get the juicy bits for sale
the older i get,the faster i was
Re: Part Recognition service...
But I'm keeping all the juicy bits Rob...In a box under the bed just to make you guys well jel...
I'll pull them out every now & then &...
Making up since 2007, sometimes it's true...Honest...
Re: Part Recognition service...
What juicy bits Bring out the Carbon and Ti Ok...if you like rattley rusty brake disks then get the PFM's out. Actually they would look the part on the wee mans Mori to keep things authentic. You should do a swappsies for the Brembo's.
==============================Enter the Darkside
Re: Part Recognition service...
Nah...The discs are SP1 fitment so pretty much usless unless you have a SP1 front hoop, which is just what happens to be on CJStorm...
Making up since 2007, sometimes it's true...Honest...
Re: Part Recognition service...
lol iv already been down that road carl lol... as mac says wrong fit for my wheel..
the older i get,the faster i was
- agentpineapple
- Posts: 15124
- Joined: Sat Mar 26, 2011 9:16 pm
Re: Part Recognition service...
if the blade cut n shut swingarm conversion is done properly, that will fit spot on.....
I had a similar one on one of my vtrs many years ago
I had a similar one on one of my vtrs many years ago
HEY YOU GUYS!!!!!!