Where do these go?
-
- Posts: 710
- Joined: Sat Jan 16, 2016 12:07 pm
- Location: Slough, Berkshire
Where do these go?
have been searching filches for what seems like forever but don't know where these parts go. As I got the storm in bits and nothing was labelled up I am a little lost. Can anyone help?
This I believe goes on the front carb sync nipple?
These I know are cable/wire tidies but where do they mount?
The rest I do not have a Jimmy choo
Any help in finding out where these go is greatly appriciated
This I believe goes on the front carb sync nipple?
These I know are cable/wire tidies but where do they mount?
The rest I do not have a Jimmy choo
Any help in finding out where these go is greatly appriciated
If it aint broke, get your bloody hands off it!
Re: Where do these go?
I belive your right with the 1st pic.
The 2nd pic where you have no clue o believe are clips that fit under the seat but they normally get removed to make getting the seat on and off easier.
The 3rd pic, look like belly pan brackets which mount around the sump using the sump bolts.
The other bits I'm not to sure on but someone will know more and or correct anything I've said
Sent from my SM-A300FU using Tapatalk
The 2nd pic where you have no clue o believe are clips that fit under the seat but they normally get removed to make getting the seat on and off easier.
The 3rd pic, look like belly pan brackets which mount around the sump using the sump bolts.
The other bits I'm not to sure on but someone will know more and or correct anything I've said
Sent from my SM-A300FU using Tapatalk
-
- Posts: 710
- Joined: Sat Jan 16, 2016 12:07 pm
- Location: Slough, Berkshire
Re: Where do these go?
Ckennedy wrote:I belive your right with the 1st pic. I shall fit this tomorrow
The 2nd pic where you have no clue o believe are clips that fit under the seat but they normally get removed to make getting the seat on and off easier. If that's the case I wont worry about those
The 3rd pic, look like belly pan brackets which mount around the sump using the sump bolts. That might make sense as I have two fitted already as per the parts filche I looked at but they didn't seem substantial enough to hold a full size belly pan.
The other bits I'm not to sure on but someone will know more and or correct anything I've said
Sent from my SM-A300FU using Tapatalk
Thanks CK
If it aint broke, get your bloody hands off it!
Re: Where do these go?
Picture 2 - cable guides up by headstock I believe (I'll try to remember to look at mine tomorrow)
Picture 3 - doesn't look like a bike part.
Picture 4 - Seat mounting brackets, fit to the seat and hook into subframe at front of pillion seat area.
Picture 5 - aftermarket belly pan/fairing lower brackets
.
Picture 3 - doesn't look like a bike part.
Picture 4 - Seat mounting brackets, fit to the seat and hook into subframe at front of pillion seat area.
Picture 5 - aftermarket belly pan/fairing lower brackets
.
http://www.bidefordmotorcycles.co.uk
2014 CRMC Post classic Superbike champion.
2014 CRMC Post classic senior production champion. On a Suzuki Katana 1100
My bikes, Firestorm, Suzuki GSX-s1000 Katana, VFR800Fi. Projects, 1986 popup Katana, 3 XJ600’s
2014 CRMC Post classic Superbike champion.
2014 CRMC Post classic senior production champion. On a Suzuki Katana 1100
My bikes, Firestorm, Suzuki GSX-s1000 Katana, VFR800Fi. Projects, 1986 popup Katana, 3 XJ600’s
-
- Posts: 710
- Joined: Sat Jan 16, 2016 12:07 pm
- Location: Slough, Berkshire
Re: Where do these go?
Cheers popkat, do you think I will need the seat brackets?
I know one of the tidys fits under the seat (the larger of the two) and I'm sure the smaller one possibly has the clutch line run through it? but not sure exactly of the mounting points.
I know one of the tidys fits under the seat (the larger of the two) and I'm sure the smaller one possibly has the clutch line run through it? but not sure exactly of the mounting points.
If it aint broke, get your bloody hands off it!
- lloydie
- Posts: 20921
- Joined: Mon Jan 17, 2011 11:16 pm
- Location: In the garage somewhere in Coventry
Re: Where do these go?
The small one fits on the left of the head stock holding the loom and clutch pipe .
The big one holds the loom on the inner rear part of the main frame on the left side
- TravisZack
- Posts: 457
- Joined: Mon Feb 17, 2014 9:48 am
Re: Where do these go?
Edit: Lloydie beat me to it but...
Pic 2 are cable stays. Found some pics from my rebuild:
Little one. Up by the headstock, clutch goes through the grommet.
Big one. Inside the left side of the frame by the back of the rear cam cover.
Pic 2 are cable stays. Found some pics from my rebuild:
Little one. Up by the headstock, clutch goes through the grommet.
Big one. Inside the left side of the frame by the back of the rear cam cover.
-
- Posts: 710
- Joined: Sat Jan 16, 2016 12:07 pm
- Location: Slough, Berkshire
Re: Where do these go?
Lloydie, Travis you two are saints and those pics are perfect, loom is all over the place at the moment so after a few hours lip I'll set to tidying it up.
If it aint broke, get your bloody hands off it!
-
- Posts: 976
- Joined: Mon Nov 14, 2011 2:00 pm
- Location: Whaplode Drove, Lincolnshire
Re: Where do these go?
The after market belly pan brackets i think are for this type belly pan
Re: Where do these go?
As Ckennedy says, these brackets are under seat brackets,
These brackets definitely look like Powerbronze lower fairing brackets as StuartWags says, although there should be three in total.
You can see where they go in this link where I have posted photos:-
http://www.vtr1000.org/phpBB3/viewtopic ... ts#p380004
Chris.
These brackets definitely look like Powerbronze lower fairing brackets as StuartWags says, although there should be three in total.
You can see where they go in this link where I have posted photos:-
http://www.vtr1000.org/phpBB3/viewtopic ... ts#p380004
Chris.
-
- Posts: 710
- Joined: Sat Jan 16, 2016 12:07 pm
- Location: Slough, Berkshire
Re: Where do these go?
Thanks a million guys, you have all been a godsend. All parts now fitted, except the bellypan brackets as will have to mod those but only have the two although I do (as per the filche) have the standard belly pan brackets as well so I'm sure I can sort something as the one I've got has no predrilled fixing points so I think work with what I have.
If it aint broke, get your bloody hands off it!
Re: Where do these go?
''Where do these go?''
In the bin if you cant find where they go...Hope that helps.
In the bin if you cant find where they go...Hope that helps.
Making up since 2007, sometimes it's true...Honest...
-
- Posts: 710
- Joined: Sat Jan 16, 2016 12:07 pm
- Location: Slough, Berkshire
Re: Where do these go?
That will be what's happening with the rest of the parts box I got with it when I'm finished
If it aint broke, get your bloody hands off it!