hello all,
can anyone say if cbr 600 F F3 calipers will bolt straight on to vtr, is it a good upgrade. and to fit cbr master cylinder or stick with original.
thanks
cbr 600 calipers
Re: cbr 600 calipers
It's F4 callipers you want & no they dont bolt straight on you need to remove some metal from either the lower fork bolt mount or from the calliper body.
Making up since 2007, sometimes it's true...Honest...
Re: cbr 600 calipers
thanks for that know what to look for now, would you use cbr or original master cylinder
Re: cbr 600 calipers
Yes.10robbo wrote:thanks for that know what to look for now, would you use cbr or original master cylinder
See here for more info...
http://www.vtr1000.org/phpBB3/viewtopic ... 31&t=15494
Making up since 2007, sometimes it's true...Honest...
- agentpineapple
- Posts: 15124
- Joined: Sat Mar 26, 2011 9:16 pm
Re: cbr 600 calipers
or sp1 or sp2 calipers, also fireblade 1998 thru to 2003. as with the cb600f4i they'll need a little adjustment.
HEY YOU GUYS!!!!!!
Re: cbr 600 calipers
yes think it may have to be f4 as they seem easier to find, doesent matter shaving a bit off as they all look like they will need painting.
still unsure on which mc to use
still unsure on which mc to use
Re: cbr 600 calipers
iv just done the blade transplant with master cyl and its a good improvment10robbo wrote:yes think it may have to be f4 as they seem easier to find, doesent matter shaving a bit off as they all look like they will need painting.
still unsure on which mc to use
the older i get,the faster i was
- StormyRob
- Posts: 1565
- Joined: Sat Nov 07, 2015 7:33 am
- Location: Northern Ireland. The place of legend
Re: cbr 600 calipers
Ive been learning a lot from the guys on here. A few in particular. The f4i m/c will be fine and will allow you to use your storm lever. I have sorted myself SP1 calipers and the f4i master.
If you don't try you never know if you can do it.