Front Fork Springs
- darrenmartin
- Posts: 416
- Joined: Mon Apr 02, 2012 5:17 am
- Location: Norfolk UK
Front Fork Springs
Hi all, i purchased a set of K-Tec front fork springs off of the forum a while back and never got round to fitting them. Im enquiring as to if there are any 'garage days' in the Norfolk/Suffolk area coming up. Or if there is any one around that would consider giving me a hand to learn on the job and fit them with me. Ill cover any costs inccured re. travel ect. ect. No harm in asking!
Like Riding Thunder and Lightning
Re: Front Fork Springs
I'm not sure this is a job that would require a lot of assistance. I assume you'll be removing the forks from the bike, draining, flushing and refilling with new oil, then installing the springs. Should be easy enough to talk you through that. If not, Cybercarl has written a good "how to " guide (so long as you ignore the bit about draining the oil into a stormwater drain...).http://www.vtr1000.org/phpBB3/viewtopic ... 31&t=29710
You don't need much in the way of tools, but will need a way to support the front of the bike off the ground so the wheel/forks can come out. You may need to make new spacers to get the correct preload on the spring; PVC pipe with an OD of around 32mm is what you need.
You don't need much in the way of tools, but will need a way to support the front of the bike off the ground so the wheel/forks can come out. You may need to make new spacers to get the correct preload on the spring; PVC pipe with an OD of around 32mm is what you need.
2017 MT-10SP, 2019 Vespa Primavera 150
Re: Front Fork Springs
simply changing the springs is a pretty straightforward job, basically remove the fork top then the horse shoe retaining washer along with the spacer and washers and finally the spring, to refit reverse the process. However to get the best from your new springs I'd recommend changing the fork oil at least and preferably remove the damper cartridge grinding the damper rod and drilling a relief hole, this allows the forks to work much better with the new springs, if you search the site there is plenty of info on how to get the best from what is a at best a mediocre front fork. To be fair once tweaked the forks actually start to work pretty well, OK they may still be a little out of their depth on a track but on the road they fair much better and cease to be the limiting factor when you start to 'push on' a bit.
Unfortunately I'm not 'local' enough to give you a hand with it but hopefully you'll find someone who is but don't forget the forum is font of knowledge if you decided to tackle it on yourself you won't be short of help and advice to talk you through any issues.
Unfortunately I'm not 'local' enough to give you a hand with it but hopefully you'll find someone who is but don't forget the forum is font of knowledge if you decided to tackle it on yourself you won't be short of help and advice to talk you through any issues.
I've now gone all European and bought a KTM Superduke GT and Aprilia RSV1000R ,
Storm is now gone . .
Storm is now gone . .
- carmanbikes
- Posts: 894
- Joined: Sat Dec 22, 2012 11:09 am
- Location: Wigan
Re: Front Fork Springs
Get in touch with Roger Ditchfield and send him your forks and springs he will sort them out and at a very good price
Re: Front Fork Springs
+1carmanbikes wrote:Get in touch with Roger Ditchfield and send him your forks and springs he will sort them out and at a very good price
If you can't get anyone to assist you Darren, that would be the best thing to do. All you have to do is remove the fork legs and put them in the post,
Chris.
- darrenmartin
- Posts: 416
- Joined: Mon Apr 02, 2012 5:17 am
- Location: Norfolk UK
Re: Front Fork Springs
many thanks for the advice guys. Iv done more work on this bike (thanks to all of the advice off of you guys on the forum) than any other machine iv had. Im not confident enough to tackle this particular job so ill hand it over to the pro's. I dont suppose off hand any of you lot know a 'ball park' figure ill be looking at paying for the job to be done would you? Also any one got the contact details of Mr Ditchfield so i could have a chin wag with him. Again, many thanks guys for your time and opinions. You lot never let me down
Like Riding Thunder and Lightning
- agentpineapple
- Posts: 15124
- Joined: Sat Mar 26, 2011 9:16 pm
Re: Front Fork Springs
have a chat with roger, if he was to supply the springs the whole job is about £225, but seen as you already have the springs it will be cheaper, give roger a call, the mans a magician when it comes to forks.....
HEY YOU GUYS!!!!!!
- darrenmartin
- Posts: 416
- Joined: Mon Apr 02, 2012 5:17 am
- Location: Norfolk UK
Re: Front Fork Springs
and his number is........? will do agent, cheers pal
Like Riding Thunder and Lightning
- bigtwinthing
- Posts: 5577
- Joined: Mon Dec 17, 2012 7:52 pm
- Location: Hampshire
Re: Front Fork Springs
Rogers Forks are superb. a great mod well worth the money. you will notice the difference in 100 yds.
missing the noise, not the vibes. However never say never!
- darrenmartin
- Posts: 416
- Joined: Mon Apr 02, 2012 5:17 am
- Location: Norfolk UK
Re: Front Fork Springs
Sweet...thanks guys and thanks for contact details 'sirch'
Like Riding Thunder and Lightning