someone has told me that the front brake disc bobbins should move (rotate) slightly
my question is
how easy should they move(best way to check without damaging them) and what is the best way to free them up if they don`t move?
thanks in advance
brake bobbins
Re: brake bobbins
Some threaded bar, 2 large flat washers and 4 nuts to act as lock nuts on each side of the bobbin. Washers will grip the bobbin and they should turn.
- bazzashadow
- Posts: 741
- Joined: Sun May 11, 2014 10:57 pm
Re: brake bobbins
darkember wrote:Some threaded bar, 2 large flat washers and 4 nuts to act as lock nuts on each side of the bobbin. Washers will grip the bobbin and they should turn.
- bigtwinthing
- Posts: 5577
- Joined: Mon Dec 17, 2012 7:52 pm
- Location: Hampshire
Re: brake bobbins
large easy out, GT85 and turn it.
missing the noise, not the vibes. However never say never!
Re: brake bobbins
Delboy garage on youtube. Good video, how to free up bobbins
Re: brake bobbins
Done a set on Sunday.
An old Banjo bolt, 14mm nut, a cordless impact driver & lashings of brake cleaner.
It's amazing the crap that comes out !
An old Banjo bolt, 14mm nut, a cordless impact driver & lashings of brake cleaner.
It's amazing the crap that comes out !
Making up since 2007, sometimes it's true...Honest...
- Miztaziggy
- Posts: 2451
- Joined: Fri Apr 15, 2011 9:15 pm
- Location: Tadcaster
Re: brake bobbins
I did 2 sets last week.
One had quite wide holes through middle of bobbins.
Other was really narrow. All I could get through was a small bolt with 8mm head and 8mm nut. Had to use a few washers to size them up on each side.
I use the 8mm socket on a drill and spin them up for 5 to 10 secs while spraying brake cleaner at them.
Sent from my GT-I9505 using Tapatalk 2
One had quite wide holes through middle of bobbins.
Other was really narrow. All I could get through was a small bolt with 8mm head and 8mm nut. Had to use a few washers to size them up on each side.
I use the 8mm socket on a drill and spin them up for 5 to 10 secs while spraying brake cleaner at them.
Sent from my GT-I9505 using Tapatalk 2