Has anyone got any experience of fitting braided hoses to a storm with a fireblade front end?
I want to go for a 2-line setup, but don't know if I need a blade kit or a storm kit.
I was thinking a blade kit for length of lines, but I am not sure as to wether the fittimgs at the top end from a blade kit will clear my fairing etc.
I have got spondon clipons on at the mo.
I am doing a track day at cadwell next month so need to get it sorted for then really.
Cheers
Andy.
braided hoses for a blade front end.
- slimreaper
- Posts: 38
- Joined: Wed Mar 12, 2003 10:07 pm
- Location: notts
braided hoses for a blade front end.
rehab is for quitters
- slimreaper
- Posts: 38
- Joined: Wed Mar 12, 2003 10:07 pm
- Location: notts
- Stormin Ben
- Posts: 1234
- Joined: Sun Dec 01, 2002 12:23 am
- Location: Birmingham
Andy,
I'd second going for the Storm kit despite it being a touch too long
My reasoning was that if I ever put the standard front end back on the hoses will fit. And for this convenience I'm prepared to overlook the slightly long hoses.
The only other thing I found was that I had to chop off the lug on the master cylinder. However I've got a knackered thumb so do have the brake lever set very low. But either way its not a big job
Ben
I'd second going for the Storm kit despite it being a touch too long
My reasoning was that if I ever put the standard front end back on the hoses will fit. And for this convenience I'm prepared to overlook the slightly long hoses.
The only other thing I found was that I had to chop off the lug on the master cylinder. However I've got a knackered thumb so do have the brake lever set very low. But either way its not a big job
Ben