what have you done to your "bike" today

[seb421]

Today i fitted Yoshimura R&D System i got a few week back, can now clean up and list those Scorpion hi mounts this week

Thanks again Carl for the Header Gaskets

Cans and pipework went on very well, are very well made and fit and finish is superb with no blowing at the joins etc

I think they have the SP1/2 Style up swept look, i like them, they are not high mount and they are not normal position either

[Vtrkidda]

nice one seb they look the bizz

[turbo_billy]

Now they do look good Seb

[Flatline]

What have I done to my bike

Dropped it

[seb421]

nice one seb they look the bizz

Thanks mate, just need a good clean with some metal polish get them like new, no dints or dents very happy.

If Satan him self made exhausts he would have made these, what a thump these offer up when you crack the throttle

[lloydie]

Seb they look great and sets the bike of a treat

[Snoogle]

If I had twin exits, I'd want them to look like yours Seb!!!!

Uber cool!!!

[seb421]

Seb they look great and sets the bike of a treat

Thanks, just need to find a place to buy one of the yoshi exhuast strap bolts the gold one and bolt you can see in the picture, lost the one on other side

Glad I spent the money now very happy with them

[Snoogle]

Is your chain touching the pipe in this pic?

[seb421]

Is your chain touching the pipe in this pic?

It's an optical illusion mate its clear no rubs or runs, from the other side when viewed there is a good amount of clearance thankfully

[tankslappa]

Looks great... I love how you blur the pics of the bike's VRN, but leave the car to get rung!

Gives me something to put on my motor next time I fill up with fuel!

Today I have put the front end back together again after cleaning all those hard to reach bits. Then found the side light wasn't working. Thought about taking the plastic off again, but as someone says, wombles to that, so just pulled the clocks off instead. Much easier.

Ended up with the sidelight in bits, extracted the pins, cleaned them up, bit of grease, and back together again. Now it works.

Checked out the voltages from my standard R/R - Neighbours must have loved me idling it, then running it at various revs to get the figures... They should count themselves lucky I only have standard cans!

Removed original R/R and mounted the Yamaha R/R, but have yet to wire it up.

[VTRDark]

They look wombles awesome Seb, what do they sound like. And the angle is perfect just as it should be. How's it running with the piper filter, those yoshis may alter things there as well.

(:-})

[seb421]

They look ferking awesome Seb, what do they sound like. And the angle is perfect just as it should be. How's it running with the piper filter, those yoshis may alter things there as well.

(:-})

Put the standard back in till i get carbs jetted, didn't have a lot of time today as plans with the bird etc, putting a film on shortly too (when shes done watching idiots have a bit of talent)

Going benny's if its still okay with him 2moz for carb help fitting the dynojet kit with the pipercross put back in

They are loud, but different to other loud cans i've herd these are a strong thumping noise, at idle they aint to bad to be honest above 2.5 - 3 k they really wake up by far the best sounding cans ive ove owned, Blueflame, Scorpions, Standards, Unknown mega mega loud race can

[Kev L]

Nice looking cans Seb. Now get the swingarm done to finish the job.

[lloydie]

seb i still think the wheels should be orange