screeching noise on starting

[Keef]

ok,so I just bought a Storm/joined forum,but have got a starting problem.
sorry,I know this has been discussed before,and I have searched for it here,I realise it is almost certainly the starter transfer gears,but,has any one got any good ones to sell,or point me in the right direction for a set,also any one who can help me fit them,west mids,or nearish ?
HELP !

[Keef]

so....
decided to strip it anyway,er,just to have a look,as you do,had to fabricate a flywheel puller (which took longer than the rest of the job) pulled it all apart,call me mr Impatient,if you will,but thought if the transfer gears are worn anyway,may as well try the welding them up trick.
So that's what I did,all back together no probs,apart from needing a new generator gasket,tested,starts well,no screeching.

Still after a set of good transfer gears,if anyone's got some to sell,as I would prefer it to be how mr Honda intended

[lloydie]

I might have a set !
I might be striping my motor down on Saturday ,I'll let you know

[Keef]

I might have a set !
I might be striping my motor down on Saturday ,I'll let you know

ooh ! excellent thank you,pm me if you have some.

[tony.mon]

I have a known good set from an engine I was using.
20 posted.

[lloydie]

I have a known good set from an engine I was using.
20 posted.

Happy days take Tony's

[Keef]

I have a known good set from an engine I was using.
20 posted.

spot on mate,can you pm me your details,to sort ?
cheers
Keef.

[fabiostar]

how did you manage to get them out of the engine?

[Wicky]

how did you manage to get them out of the engine?

https://www.vtr1000.org/phpBB3/viewtopi ... rag+clutch

[bazza696]

Does the bike have manual tensioners in it, when changing mine, it screeched when adjusting them to tight.

[Keef]

how did you manage to get them out of the engine?

removed starter,gen cover,generator,removed tensioner slider bolt,slid tensioner down,removed gear spindle,gears lift out !

[Keef]

Does the bike have manual tensioners in it, when changing mine, it screeched when adjusting them to tight.

no,not yet. cured now,so defo gears.

[fabiostar]

how did you manage to get them out of the engine?

removed starter,gen cover,generator,removed tensioner slider bolt,slid tensioner down,removed gear spindle,gears lift out !

i was was wondering as mine had the same problem a few years ago but i give it to somebody else incase i done more damage than good.

[Keef]

I have a known good set from an engine I was using.
20 posted.

spot on mate,can you pm me your details,to sort ?
cheers
Keef.

not sure if you can pm me ?

I can't send,but may be able to receive messages ?