Hazard light switch
- TaxiDriver
- Posts: 327
- Joined: Sat Dec 30, 2017 8:15 pm
- Location: The Red Rose
Hazard light switch
Has anyone fitted a hazard circuit and is it even possible to do this?
Re: Hazard light switch
No, Yes, Why ?TaxiDriver wrote: ↑Tue Jan 01, 2019 8:18 am Has anyone fitted a hazard circuit and is it even possible to do this?
Making up since 2007, sometimes it's true...Honest...
Re: Hazard light switch
I see bikes with hazzard flashing when they are filltering...It's not really the correct use of them & as most cagers on the commute when in lines of traffic rarely use their mirrors anyway it's a bit pointless...
have a read of this...
https://mocktheorytest.com/resources/wh ... ng-lights/
have a read of this...
https://mocktheorytest.com/resources/wh ... ng-lights/
Last edited by MacV2 on Tue Jan 01, 2019 11:25 am, edited 1 time in total.
Making up since 2007, sometimes it's true...Honest...
- TaxiDriver
- Posts: 327
- Joined: Sat Dec 30, 2017 8:15 pm
- Location: The Red Rose
Re: Hazard light switch
Oh,good,to prevent being rear ended.....matron.
Re: Hazard light switch
Ride with you lights on...Neither will stop the rear ender if the fekwit driving the car is not paying attention...
Making up since 2007, sometimes it's true...Honest...
Re: Hazard light switch
Simplest way would be to fit a second flasher relay with a push-to-talk or regular type switch, and connect both rears and fronts to just one side of the relay.
For filtering, you probably only need the front pair flashing.
For filtering, you probably only need the front pair flashing.
It's not falling off, it's an upgrade opportunity.
Re: Hazard light switch
Not hard to make it work, somewhat hard to do cleanly, not hard at all to do well if you have good experience with wiring.
Id use a electronic flasher, some diodes to isolate the new circuits, use a ON/Off push switch in a add on switch holder mounted to the clutch or brake master with switch holders from https://www.highwaydirtbikes.com/index. ... irt Bikes they have some brilliant parts usable on pure street bikes. Properly tie in to all four light circuits using new sealed type connectors from Furukawa, Sumitomo, Tyco/AMP, or Yazaki https://www.corsa-technic.com/category. ... ory_id=120
Id use a electronic flasher, some diodes to isolate the new circuits, use a ON/Off push switch in a add on switch holder mounted to the clutch or brake master with switch holders from https://www.highwaydirtbikes.com/index. ... irt Bikes they have some brilliant parts usable on pure street bikes. Properly tie in to all four light circuits using new sealed type connectors from Furukawa, Sumitomo, Tyco/AMP, or Yazaki https://www.corsa-technic.com/category. ... ory_id=120
Marquez Motorcycle Services
Solutions to recurring maintenance
Race/Adventure ride event prep
Post event services
Total Rider
Your path to a TX motorcycle license
And advanced Rider training
Solutions to recurring maintenance
Race/Adventure ride event prep
Post event services
Total Rider
Your path to a TX motorcycle license
And advanced Rider training