Brake Disc SOLD

Moderator: VTRDark

Post Reply
User avatar
carmanbikes
Posts: 894
Joined: Sat Dec 22, 2012 11:09 am
Location: Wigan

Brake Disc SOLD

Post by carmanbikes »

Just thought I would ask if anyone wants to buy these Braking wavy brake disc they are in really good condition with hardly any lip at all but have been used £120 plus p+p
Image

Image
Image
Last edited by carmanbikes on Wed Dec 02, 2015 1:58 pm, edited 1 time in total.
User avatar
Seeker 77
Posts: 1255
Joined: Sat Jul 16, 2005 12:14 pm
Location: Uxbridge, England

Re: Brake Disc

Post by Seeker 77 »

Very interested in these mate, what's the thickness of the disc now?
User avatar
carmanbikes
Posts: 894
Joined: Sat Dec 22, 2012 11:09 am
Location: Wigan

Re: Brake Disc

Post by carmanbikes »

mellis wrote:Very interested in these mate, what's the thickness of the disc now?
Hi, They are less than a fag paper thinner than new, they are as close to new as you will get :thumbup:
User avatar
kev64
Posts: 1003
Joined: Wed Aug 13, 2014 7:06 pm
Location: Malvern, Worcs

Re: Brake Disc

Post by kev64 »

Hi mate , ill have these if Mellis don't want them !!
User avatar
kev64
Posts: 1003
Joined: Wed Aug 13, 2014 7:06 pm
Location: Malvern, Worcs

Re: Brake Disc

Post by kev64 »

Oh and one last thing, are they a proper make, or Chinese?
User avatar
bigtwinthing
Posts: 5577
Joined: Mon Dec 17, 2012 7:52 pm
Location: Hampshire

Re: Brake Disc

Post by bigtwinthing »

kev64 wrote:Oh and one last thing, are they a proper make, or Chinese?
tut tut chinese is a proper make :lol: They make my tea for me on a Friday.
missing the noise, not the vibes. However never say never!
User avatar
carmanbikes
Posts: 894
Joined: Sat Dec 22, 2012 11:09 am
Location: Wigan

Re: Brake Disc

Post by carmanbikes »

kev64 wrote:Oh and one last thing, are they a proper make, or Chinese?
No proper Braking ones NOT Chinese
User avatar
kev64
Posts: 1003
Joined: Wed Aug 13, 2014 7:06 pm
Location: Malvern, Worcs

Re: Brake Disc

Post by kev64 »

PM sent
User avatar
carmanbikes
Posts: 894
Joined: Sat Dec 22, 2012 11:09 am
Location: Wigan

Re: Brake Disc

Post by carmanbikes »

NOW SOLD
User avatar
Seeker 77
Posts: 1255
Joined: Sat Jul 16, 2005 12:14 pm
Location: Uxbridge, England

Re: Brake Disc

Post by Seeker 77 »

Ah ok, no queuing system here then :thumbdown: I thought "very interested" might be an obvious statement of intent but clearly not.
tony.mon
Posts: 15967
Joined: Wed Jul 25, 2007 10:46 pm
Location: Norf Kent

Re: Brake Disc

Post by tony.mon »

Braking wave vs Chinese ones:
Braking Wave, lots of metal between the outermost end of the diagonal slot and the outer edge of the disc= no cracks...

Chinese knock-off, very little metal and they crack under the heat. They don't break up, as far as I know, but I'd rather have a single piece of metal rather than several bits joined at one end.

I've tried both, and posted a piccy of the cracked Chinese ones somewhere on here.

Same thing with Chinese exhaust pipes. just Google "Crack Pipes" for an exhaustive collection of sad ends.
It's not falling off, it's an upgrade opportunity.
User avatar
bigtwinthing
Posts: 5577
Joined: Mon Dec 17, 2012 7:52 pm
Location: Hampshire

Re: Brake Disc

Post by bigtwinthing »

tony.mon wrote:Braking wave vs Chinese ones:
Braking Wave, lots of metal between the outermost end of the diagonal slot and the outer edge of the disc= no cracks...

Chinese knock-off, very little metal and they crack under the heat. They don't break up, as far as I know, but I'd rather have a single piece of metal rather than several bits joined at one end.

I've tried both, and posted a piccy of the cracked Chinese ones somewhere on here.

Same thing with Chinese exhaust pipes. just Google "Crack Pipes" for an exhaustive collection of sad ends.
:lol: :thumbup: so sharp you will cut yourself Tony.
missing the noise, not the vibes. However never say never!
tony.mon
Posts: 15967
Joined: Wed Jul 25, 2007 10:46 pm
Location: Norf Kent

Re: Brake Disc

Post by tony.mon »

bigtwinthing wrote:
tony.mon wrote:Braking wave vs Chinese ones:
Braking Wave, lots of metal between the outermost end of the diagonal slot and the outer edge of the disc= no cracks...

Chinese knock-off, very little metal and they crack under the heat. They don't break up, as far as I know, but I'd rather have a single piece of metal rather than several bits joined at one end.

I've tried both, and posted a piccy of the cracked Chinese ones somewhere on here.

Same thing with Chinese exhaust pipes. just Google "Crack Pipes" for an exhaustive collection of sad ends.
:lol: :thumbup: so sharp you will cut yourself Tony.
Beer and a keyboard- what could possibly go wrong?
:thumbup:
It's not falling off, it's an upgrade opportunity.
User avatar
bigtwinthing
Posts: 5577
Joined: Mon Dec 17, 2012 7:52 pm
Location: Hampshire

Re: Brake Disc

Post by bigtwinthing »

are you good at Cryptic crosswords
missing the noise, not the vibes. However never say never!
tony.mon
Posts: 15967
Joined: Wed Jul 25, 2007 10:46 pm
Location: Norf Kent

Re: Brake Disc

Post by tony.mon »

bigtwinthing wrote:are you good at Cryptic crosswords
No I can only manage English, Greek, and Latin ones.
It's not falling off, it's an upgrade opportunity.
Post Reply