lloydie's dyno chats and setting for kermit.

Just post charts and set up details.
User avatar
lloydie
Posts: 20920
Joined: Mon Jan 17, 2011 11:16 pm
Location: In the garage somewhere in Coventry

Re: lloydie's dyno chats and setting for kermit.

Post by lloydie »

cybercarl wrote:That's given you a nice little boost. but you really should stop chatting with the dyno. It's the first sign of madness. :wink: Your still getting the 5000 dip though.

(:-})
Lol but the dip isn't noticeable .
I'm having a play with a few different setting and parts to see if I can regain some mid range as its very weak there .


Sent from my iPhone using Tapatalk
User avatar
Stephan
Posts: 983
Joined: Sun Apr 15, 2012 6:58 pm
Location: Prague, Czech

Re: lloydie's dyno chats and setting for kermit.

Post by Stephan »

What about slight changes in the beginning? 2.25+2.5 pilots and needles dropped by one slot.
User avatar
lloydie
Posts: 20920
Joined: Mon Jan 17, 2011 11:16 pm
Location: In the garage somewhere in Coventry

Re: lloydie's dyno chats and setting for kermit.

Post by lloydie »

Yep I did that and was better but still not great .
I'm going to try a few more things then pop the cams back in and start all over again :-)


Sent from my iPhone using Tapatalk
User avatar
agentpineapple
Posts: 15123
Joined: Sat Mar 26, 2011 9:16 pm

Re: lloydie's dyno chats and setting for kermit.

Post by agentpineapple »

revving to over 9500rpm..... :eek2 :eek2 :eek2
that's got to be faster than that chris fella's bike.... :wink:
HEY YOU GUYS!!!!!!
User avatar
lloydie
Posts: 20920
Joined: Mon Jan 17, 2011 11:16 pm
Location: In the garage somewhere in Coventry

Re: lloydie's dyno chats and setting for kermit.

Post by lloydie »

It keeps building power all the way to the limiter :-) as yes It does catch that rsv on the straights :-)


Sent from my iPhone using Tapatalk
User avatar
8541Hawk
Posts: 2066
Joined: Sat Jul 21, 2012 5:21 am
Location: Bella Vista, AR

Re: lloydie's dyno chats and setting for kermit.

Post by 8541Hawk »

One tech tip.... I don't know if the advancer is helping you or not.

My HRC box does add advance down low but then starts to retard the timing as the revs rise.

Could be the cause of the 5K dip but they are a pain to swap out to see if you get a difference.
Loud pipes don't save lives, knowing how to ride your bike will save your life.
User avatar
VTRDark
Posts: 20010
Joined: Sun Mar 18, 2012 9:24 pm

Re: lloydie's dyno chats and setting for kermit.

Post by VTRDark »

I agree with Mike actually and that is a very good point brought up. it will only get worse once you add cams too. You don't want to over advance things and then detonate. :eek2 If anything I think a -2 retarder would be better for you. You have already advanced the ignition by going higher comp hence the knock and suggested use of higher octane fuel with high comps. Note that Roger does not use the advancers either, he is not a fan.

Now you have gone high comp you need to tread carefully. There is no room for trial and error, just stick it in to try, see if if works kind of thing, see what it feels like attitude. You need to start calculating things more. Unless of course you don't mind experimenting at the expense of doing engine rebuilds.

(:-})
==============================Enter the Darkside
User avatar
lloydie
Posts: 20920
Joined: Mon Jan 17, 2011 11:16 pm
Location: In the garage somewhere in Coventry

Re: lloydie's dyno chats and setting for kermit.

Post by lloydie »

It's all good fun :-) tho it did pull stronger with a standard advance in !
I'll swap it backout and see


Sent from my iPhone using Tapatalk
Post Reply