VTRNZ

Show off your bike, modifications or projects and share them with the world.
User avatar
legendlives
Posts: 165
Joined: Sun Jul 05, 2015 9:43 am
Location: Auckland, NZ
Contact:

Re: VTRNZ

Post by legendlives »

Part 2:

The only good bit about the cans that came on the bike was this:

Image

So I thought I'd try and use them, by ramming them up the hole of the Kawasaki cans (!)

And here's the finished article:

Image

Image

Image

Dumpy and shiny. Just like the wife!
They'll look great tucked under the tail of the 'Storm.
I like my bikes like my women - Loud with two big cylinders :D
User avatar
legendlives
Posts: 165
Joined: Sun Jul 05, 2015 9:43 am
Location: Auckland, NZ
Contact:

Re: VTRNZ

Post by legendlives »

Side by side before & after:

Image

And I had a rethink on the screen, mainly because this absolutely perfect Yamaha BT07 screen came my way cheap. Well $45NZ cheap (that's around 20 quid!)

Image

Now THAT is the look I wanted :D
I like my bikes like my women - Loud with two big cylinders :D
User avatar
legendlives
Posts: 165
Joined: Sun Jul 05, 2015 9:43 am
Location: Auckland, NZ
Contact:

Re: VTRNZ

Post by legendlives »

Standard rear subframe. Pretty ugly with lots of stuff I don't need.
Image
After a quick carve up and a bit of Tiggery. Small brackets on the front lower member are the front mounts for the Fireblade tailpiece.
Image
Big brackets on the side are the top/rear tailpiece mounts. Tubes between the two members are exhaust mounts and will take the original rear exhaust mount rubbers.
Image
Little tube across the back to hold everything together. Or apart. Depending on your perspective......
Image
I like my bikes like my women - Loud with two big cylinders :D
User avatar
sirch345
Site Admin
Posts: 21669
Joined: Mon Aug 25, 2003 10:35 pm
Location: The West Country.

Re: VTRNZ

Post by sirch345 »

You're certainly getting on with the build :clap:

Chris.
User avatar
legendlives
Posts: 165
Joined: Sun Jul 05, 2015 9:43 am
Location: Auckland, NZ
Contact:

Re: VTRNZ

Post by legendlives »

sirch345 wrote: Tue Jul 09, 2019 10:38 pm You're certainly getting on with the build :clap:

Chris.
Yeah, my car build is 'on hold' at the moment as it's waiting to go to a car show and I don't want to do too much to it before then. Oh, and I get itchy fingers!

Onwards and upwards, this is the look!

Image

Well, its a look.........
I like my bikes like my women - Loud with two big cylinders :D
User avatar
legendlives
Posts: 165
Joined: Sun Jul 05, 2015 9:43 am
Location: Auckland, NZ
Contact:

Underseat part 1

Post by legendlives »

There was no way that the ugly radiators were ever going back on the side of the bike, so a new location for another radiator needed to be found, and I know I'm not the first to spot the under-seat area as a likely location. There will not be a pillion seat going back on, so I looked around for a suitable rad that would fit the space.
I came up with this:

Image

It's an auxiliary radiator from an Audi Turbo, and possibly the most perfect fit I could have found. It's about 1.5 times the surface area of one of the single VTR rads, and about 1.5 times the thickness so should (cross-fingers) be about right cooling-wise.

So carefully taking a grinder to the under-seat panel:

Image

and trying it all for size:

Image

Even the VTR fan (with it's little shroud removed) is about the perfect size.

And to cap it all, it all fits under the tailpiece!

Image

It will have a grille to protect it underneath, but should work great!

Image
I like my bikes like my women - Loud with two big cylinders :D
User avatar
fabiostar
Posts: 7542
Joined: Sat Jun 01, 2013 3:53 pm
Location: sunny belfast

Re: VTRNZ

Post by fabiostar »

thats a real nice looking job :thumbup:
the older i get,the faster i was :lol:
User avatar
sirch345
Site Admin
Posts: 21669
Joined: Mon Aug 25, 2003 10:35 pm
Location: The West Country.

Re: VTRNZ

Post by sirch345 »

You've done well in finding that radiator with it being such a good fit, and the increase in volume against one standard rad :clap:

Chris.
User avatar
freeridenick
Posts: 1574
Joined: Fri May 23, 2014 1:30 pm
Location: Derbyshire

Re: Underseat part 1

Post by freeridenick »

legendlives wrote: Wed Jul 10, 2019 7:00 am There was no way that the ugly radiators were ever going back on the side of the bike...
Mac will hate it anyway.
legendlives wrote: Wed Jul 10, 2019 7:00 am It will have a grille to protect it underneath, but should work great!

Image
Nice work that. Is the fan sucking or blowing in that position and what are your plans for the hose routing? IIRC someone else who did this had problems with getting the coolant to flow uphill.
User avatar
legendlives
Posts: 165
Joined: Sun Jul 05, 2015 9:43 am
Location: Auckland, NZ
Contact:

Underseat part 2

Post by legendlives »

freeridenick wrote: Wed Jul 10, 2019 12:53 pm Nice work that. Is the fan sucking or blowing in that position and what are your plans for the hose routing? IIRC someone else who did this had problems with getting the coolant to flow uphill.
The fan will probably be blowing, but I'll do a bit of investigation as to which side will be the lowest pressure area.
Hopefully it shouldn't give problems with coolant circulation, but if it does there are plenty of cars now using small 12v aux coolant pumps.

Back to the radiator.

Image

The inlet and outlet tubes are 5mm smaller than the VTR hoses, and one of those would be poking straight up my elbow in their current directions.
So I fired up the grinder and....

Image

Too late to turn back now!
The new tank is shaped for more seat clearance, has a bit more capacity, has the bottom hose pointing in the right direction and a provision for the fan switch.

Image

Image
I like my bikes like my women - Loud with two big cylinders :D
User avatar
Wicky
Posts: 7895
Joined: Sat Feb 11, 2006 2:43 pm
Location: Colchester Essex
Contact:

Re: VTRNZ

Post by Wicky »

It may be that your whole purpose in life is simply to serve as a warning to others.

ImageVTR Firestorm and other bikes t-shirts
User avatar
legendlives
Posts: 165
Joined: Sun Jul 05, 2015 9:43 am
Location: Auckland, NZ
Contact:

Re: VTRNZ

Post by legendlives »

Nice conversion. Hopefully mine will keep the temps similar to stock!
I like my bikes like my women - Loud with two big cylinders :D
User avatar
legendlives
Posts: 165
Joined: Sun Jul 05, 2015 9:43 am
Location: Auckland, NZ
Contact:

Underseat part 3

Post by legendlives »

Applying the same method to the other tank, but this one has the filler neck and another 25mm barb to take (what will be) a 90 degree hose pointing forward.

Image

Image

Image

Just the mounts to make and I can start to make the plumbing!
I like my bikes like my women - Loud with two big cylinders :D
User avatar
legendlives
Posts: 165
Joined: Sun Jul 05, 2015 9:43 am
Location: Auckland, NZ
Contact:

Re: VTRNZ

Post by legendlives »

Made this shroud to cover all of the ugly bits:

Image

It's made from 2mm aluminium and attaches to the screen mount bolts. Weighs very little.
Will be either all body colour or body colour with wide black stripe.
I like my bikes like my women - Loud with two big cylinders :D
User avatar
Shauned71
Posts: 637
Joined: Wed Mar 13, 2013 12:09 am
Location: Cardiff, Wales

Re: VTRNZ

Post by Shauned71 »

This is looking cool... keep up the good work! I will be following with interest because I want to do the same... Gota finish my last project from 2 years ago.. rebuilt my matt black storm, used it once for a 300 mile round trip which was also it's shakedown, wasn't overly happy with it and haven't touched it since. Just cleared up my other jobs so will finish other bike and then I want to make a start on the street fighter.. got most my ideas already and they also include under seat rad so will be keeping an eye on how it works out for you :thumbup:
Post Reply