VTR1000.ORG

Is that the touring version Mariwaki?. It looks like a picnic table with a couple of coasters to put your tea cups on



Sent from my iPhone using Tapatalk

Pete.L wrote: ↑Sat Feb 02, 2019 2:25 pm Is that the touring version Mariwaki?. It looks like a picnic table with a couple of coasters to put your tea cups on



Sent from my iPhone using Tapatalk

its a beer table all will become clear when its painted and a few other little touches need doing. trust me, im a doctor

well, another little step. my quest for 320s is sorted.

not really my choice being waveys but they came cheap and atm im skint .

FZR400 sp wheel.
Aprilia 320 discs (braking waveys)
2mm spacers behind them
new wheel spacers
kawasaki bearings
machined axle

just have to make the spacers to move the Brembos back a little and job done

fabiostar wrote: ↑Sun Feb 03, 2019 6:28 pm well, another little step. my quest for 320s is sorted.

not really my choice being waveys but they came cheap and atm im skint .

FZR400 sp wheel.
Aprilia 320 discs (braking waveys)
2mm spacers behind them
new wheel spacers
kawasaki bearings
machined axle

just have to make the spacers to move the Brembos back a little and job done

That looks amazing Rob

Are those Brembo calipers radial ones you little rascal

Chris.

they are indeed chris . another ebay find about two years ago. great brakes i have to say and matched to the radial blade master proper nice stopping power

fabiostar wrote: ↑Sun Feb 03, 2019 6:28 pm well, another little step. my quest for 320s is sorted.

not really my choice being waveys but they came cheap and atm im skint .

FZR400 sp wheel.
Aprilia 320 discs (braking waveys)
2mm spacers behind them
new wheel spacers
kawasaki bearings
machined axle

just have to make the spacers to move the Brembos back a little and job done

Nice work!!!!!

fabiostar wrote: ↑Sun Feb 03, 2019 11:02 pm they are indeed chris . another ebay find about two years ago. great brakes i have to say and matched to the radial blade master proper nice stopping power

have they got big strong pins to hold the pads in

norry rc8 wrote: ↑Mon Feb 04, 2019 8:14 pm

fabiostar wrote: ↑Sun Feb 03, 2019 11:02 pm they are indeed chris . another ebay find about two years ago. great brakes i have to say and matched to the radial blade master proper nice stopping power

have they got big strong pins to hold the pads in

lol they are a special Scotish mod but top secret

fabiostar wrote: ↑Sun Feb 03, 2019 11:02 pm they are indeed chris . another ebay find about two years ago. great brakes i have to say and matched to the radial blade master proper nice stopping power

I'll be watching this with great interest

Chris.

well the brakes fit, new spacers turned up, just need lined up a little and a good clean and thats the front sorted.






yes the banjo bolts will be cleaned lol

rear wheel ripped out again as the chainguard was rubbing but thats sorted now aswell. a lot of bolts lockwired round the bike, pretty much every bolt thread locked, and matching spacers that had odd ball things and washers as packing, stuff you cant really see but i knew the little bugger were there .

getting close now

Not using ti bolts?

Looks good, though

tony.mon wrote: ↑Wed Feb 20, 2019 8:38 pm Not using ti bolts?

Looks good, though

lol bollox to that i just wana get it back on its wheels and on the road..im more a fan of stainless bolts anyhow.

looking good (Brembo's should hold up to Scottish roads)

norry rc8 wrote: ↑Wed Feb 20, 2019 10:02 pm looking good (Brembo's should hold up to Scottish roads)

and we should have enough spare retaining clips between us if he loses one again

I wondered how you were going to mount those radial Brembo calipers on your Blade forks, nice one Rob