47 Today...The Shilling...
47 Today...The Shilling...
Happy Burb Day Mark...AKA GL_S_R, AKA Shilling, AKA Tuba butt...
Have a good one today then get back to work on the Bizta...Your deadline for compleation is April 22nd...
Have a good one today then get back to work on the Bizta...Your deadline for compleation is April 22nd...
Making up since 2007, sometimes it's true...Honest...
- lloydie
- Posts: 20920
- Joined: Mon Jan 17, 2011 11:16 pm
- Location: In the garage somewhere in Coventry
Re: 47 Today...The Shilling...
Happy birthday
- alanfjones1411
- Posts: 2792
- Joined: Thu May 21, 2015 3:33 pm
- Location: watford
Re: 47 Today...The Shilling...
Happy birthday. Have a good in
SO WHEN DOES THIS OLD ENOUGH TO KNOW BETTER KICK IN
Re: 47 Today...The Shilling...
Happy birthday Mark, have a good'un
Carpe diem, quam minimum credula postero
F3, 954 USD front, K Tech springs, Braced swinger, Penske shock, Six spoke Mockesini wheels, Harris rearsets, QaT, Flywheel diet!, A&L stacks, stick coils, K&N, FP Ti jets, lashings of Ti & CF
F3, 954 USD front, K Tech springs, Braced swinger, Penske shock, Six spoke Mockesini wheels, Harris rearsets, QaT, Flywheel diet!, A&L stacks, stick coils, K&N, FP Ti jets, lashings of Ti & CF
Re: 47 Today...The Shilling...
Happy birthday Mark . now get back down into that shed, you have work to do.
the older i get,the faster i was
- TheGingerBeardMan
- Posts: 977
- Joined: Sun Sep 28, 2014 8:30 pm
- Location: Aberdeenshire, Scotland
Re: 47 Today...The Shilling...
Erm...ok. can someone explain the Shilling part?
Does he need 5p dropped down his slot to make him work?
Does he need 5p dropped down his slot to make him work?
If it ain't broken...f*ck about with it until it is.
TAX: 1st March 2017
MOT: 16th March 2017
INS: 14th March 2017
TAX: 1st March 2017
MOT: 16th March 2017
INS: 14th March 2017
- agentpineapple
- Posts: 15123
- Joined: Sat Mar 26, 2011 9:16 pm
Re: 47 Today...The Shilling...
mark had some issues with hi fancy chain adjuster setup, and needed to wedge a 5p in it to make it work.........TheGingerBeardMan wrote:Erm...ok. can someone explain the Shilling part?
Does he need 5p dropped down his slot to make him work?
happy birthday mark, and as mac said, hurry up and finish bitsa, I saw the photo you posted on fb, it looks the dogs danglys mate...
HEY YOU GUYS!!!!!!
Re: 47 Today...The Shilling...
happy birthday mark. don't waste it in the pub, get in the workshop NOW
AMcQ
- BigVeeGrin
- Posts: 2516
- Joined: Wed Feb 17, 2010 1:41 pm
- Location: Glasgow
Re: 47 Today...The Shilling...
have a good one
Re: 47 Today...The Shilling...
Happy Birthday Mark
Chris.
Chris.
Re: 47 Today...The Shilling...
agentpineapple wrote:mark had some issues with hi fancy chain adjuster setup, and needed to wedge a 5p in it to make it work.........TheGingerBeardMan wrote:Erm...ok. can someone explain the Shilling part?
Does he need 5p dropped down his slot to make him work?
happy birthday mark, and as mac said, hurry up and finish bitsa, I saw the photo you posted on fb, it looks the dogs danglys mate...
Bastid tight git still owes me that 5p...
Making up since 2007, sometimes it's true...Honest...
- TheGingerBeardMan
- Posts: 977
- Joined: Sun Sep 28, 2014 8:30 pm
- Location: Aberdeenshire, Scotland
Re: 47 Today...The Shilling...
Just add the loss onto the price of yer next parts shipment. Don't forget the added interest on the original 5p loan.MacV2 wrote:Bastid tight git still owes me that 5p...
I reckon, after all this time, the total due must be nearly a quid!
Last edited by TheGingerBeardMan on Mon Jan 23, 2017 4:32 pm, edited 1 time in total.
If it ain't broken...f*ck about with it until it is.
TAX: 1st March 2017
MOT: 16th March 2017
INS: 14th March 2017
TAX: 1st March 2017
MOT: 16th March 2017
INS: 14th March 2017
Re: 47 Today...The Shilling...
The trouble with that GBM is that Mark (GLSR, shilling) doesn't order spare parts he just magically creates them out of very light and precious metals, the git, and then bolts it all together so that we all drool over the finished result. Of course it don't always work hence the 5p!
Carpe diem, quam minimum credula postero
F3, 954 USD front, K Tech springs, Braced swinger, Penske shock, Six spoke Mockesini wheels, Harris rearsets, QaT, Flywheel diet!, A&L stacks, stick coils, K&N, FP Ti jets, lashings of Ti & CF
F3, 954 USD front, K Tech springs, Braced swinger, Penske shock, Six spoke Mockesini wheels, Harris rearsets, QaT, Flywheel diet!, A&L stacks, stick coils, K&N, FP Ti jets, lashings of Ti & CF
- lloydie
- Posts: 20920
- Joined: Mon Jan 17, 2011 11:16 pm
- Location: In the garage somewhere in Coventry
Re: 47 Today...The Shilling...
Can't wait to see bitza finished as it's really taking shape (I've seen pics) if I printed them off they'll be like a used jazz mag !