VTR1000.ORG

Hope you had a good day, Kev.

agentpineapple wrote: ↑Thu May 09, 2024 3:46 pm cheers gents...

Took you a while to shake off the hangover, Marty!

AMCQ46 wrote: ↑Fri May 10, 2024 6:28 am Worked out why it feels flat, it’s only a 930cc 115bhp engine. they stopped The v2 with the 1200cc engine when they brought out the V4.


I am going to have to thrash the life out of this to keep up with the Aprilia V4s

Think of it as a Storm on stilts.

You don't do too bad on one of those.

There are MOT rules about lighting, you might get get a pull.

You also need the brackets to suit the std under tray, assuming that the aftermarket one required non standard brackets.
Then it's a simple process: unbolt the required sump bolts, bolt up the standard brackets, and fit the tray.

Did the old gaskets come out when you took the headers off? They often stay in the port on disassembly, and then you get the problem you describe, as you're trying to fit a new gasket on top of the old one. Try using a pick or screwdriver to make sure the port is "empty".

I'll bring some.
Looks quiet this year, how many are you expecting?

And it's only £42 a month in PayPal credit.

I've never been that keen on scrubbing in a new front, but today I put a new Bridgestone RS11 on and happily wandered about for 55 miles. I didn't go anywhere in particular, but took in plenty of roundabouts. I'm about two thirds of the way so far, but that'll do for the first heat cycle. Makes a ch...

Richard wrote: ↑Tue Apr 30, 2024 6:54 am I like orange

Guantanamo Bay for your hols this year?

No, they will run (just about) with either cylinder working.

Have a good one, Stuart

There are loads of different formulae of Loctite, and each has different characteristics. Some "lock" tighter than others, so only use the stronger ones if you rarely, if ever, want to undo the fastening again. Others have resistances to heat or fluids- some won't work with exposure to oil...

Looks good, just the clutch cover and can to go.

Lol.
Let us know when the effects start...