VTR1000.ORG

Welcome to the forum, good find a 1998 vtr with 10000 miles on the clock..

I will test lower pressures, I feel comfortable with the " manual specified " ones, but actually I haven´t tested
different ones.

But..
My VTR manual says 3bar rear and 2,5 bar front, ( this is 43,5 psi rear and 36,25 psi front) are yours different?

Nice winter project.
Welcome

I have these fitted https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.co.uk%2Fulk%2Fitm%2F253937544083 and have done for the last 50,000 miles. They are a nice solid construction and have very well-designed integrated seals. +1 Fitted 1000 km ago, little more expensive than the other a...

Welcome, very nice looking machine..

Nice machine, you will enjoy it..

Welcome to the forum.
Pictures, please..

Sorry, but the gyrocopter invention comes from the spanish person, Juan de la Cierva..
Interesting article anyway.

For early models, ( like my 97 model) the best fuel gauge is to reset the odometer to 0 when you fill the tank.
After this, in my case I have 160 km until the light turn on. Depending on your driving, etc this number may vary, but not too much.

I have gauges installed, i like to check time to time. Anyway, with new ( and upgraded) regulator and new battery you shouldn't´have problems in some time.. At starting I like to check that the regulator is working, and oil pressure is ok, and tyre pressure is within limits.. I installed gauges in t...

There are not simple rectifiers. The main problem here is to keep the DC voltage within limits. ( about 14V). The AC generator increases the voltage with the rpm. They are low KV ( revs per volt) generators , to assure that at idle they are producing enough voltage to keep the output DC voltage to 1...

Yes, the FH020 that I own is a original shindengen unit, and no problem about the wiring.

Thanks for the reply

Hello.
I have this SH693H regulator in my VTR. Not sure if is a modern one or not, I don´t find information on the web .. seems to work well, but.. I have a spare new in box mosfet FH020, should I change it?

Thanks

Welcome to the forum.