VTR1000.ORG

You can fit a new ceramic bearing but it's really only needed if it starts leaking psst the seal. And they're not cheap.... There's a small drain hole just forward of the water pump with either just a plain hole or a 90degrees spigot. If the water level drops then it's worth looking into, not other...

Hi yeah all sorted then, I'll try and buy a pair of new rubbers soon just waiting for the flywheel Rob. Got a new clutch kit I've had for sometime might time that in with the flywheel fitting. What about the water pump if I go in there do you need to service it? Can you service it cheers.

Boom! pinking gone took it apart and reset the manifolds, cheers folks for the help, tony.mon. So what I'll do is buy a new set from somewhere.

Awesome info thank you. As far as I can see and feel the manifols look tight and right but maybe they're not maybe there's a leak there I'll recheck maybe seal with something. The plugs are looking good no uneven burn pattern. Yes your right it does make sense what you posted thanks I'll look at ton...

Yes sorry pinking and I am trying a high octane today. The jets are 48 pilots and 180 182 mains rob but remember this problem has only just started. Cheers everyone for the welcome.

Hi folks I've joined the forum because i enjoy the info you get here and I need your help. I have the 1998 model storm and my ride it pinging while accelerating from standing start, 1st gear 2nd gear and when at low rev's pulling away, also decelerating. What changes have taken place? well i took th...