VTR1000.ORG

Reached a milestone today, the Necromorph is now on its own two wheels http://i995.photobucket.com/albums/af77/CBRRRT/20130129_191514.jpg I've got it leaning slightly to get the correct angle to weld on the CBR600 side stand bracket. http://i995.photobucket.com/albums/af77/CBRRRT/20130129_191616.jpg...

Fantastic, thanks guys, some great information there, and a mod I will be doing to my build "The Necromorph"

Has anyone got any information "How to" do a stick coil conversion for a VTR f.

I only have sketchy details at best and believe it involves CBR stick coils.

Sorry i don't like that rear set unit at all Seen it on the facebook streetfighter page Rest of it looks smart tho, But them spikes make it look half done and very "yank" This just how i see it. On the up note what's that visor like? my one is wombles on my super bandit I'll trade mine an...

Today I went to my mate Rods house to borrow some time on his lathe. I want to make the nipples the hose will connect my tank to my chamber with. Istarted with 12mm round bar, then faced the end and drilled a pilot hole in the end to hold the work centered. http://i995.photobucket.com/albums/af77/CB...

Nice engineering work, but I had 2 thoughts [which is 2 more than normal! :lol: ] 1) why do you need a fuel tap anyway? if you want to take the tank off you will still have to clamp the pipe from the tank to the new subchamber, I assume it is only there to stop any risk of the float bowls leaking. ...

Ive got an issue wthe the fuel tap on the bottom of the tank and where to mount it. My Bandit tank hasnt got one, so I brought a dented up storm tank and cut the mount out the bottom of it to weld on the under side of my bandit jobby. Nup!!! No where to mount it with enough cleaence and that will al...

With my wiring diagrame I went through the loom and figured out what was what, then labeled everything up. http://i995.photobucket.com/albums/af77/CBRRRT/20121028_134642.jpg I can now position everything like the regulator rectifier, starter solonoid, relays, etc and run the loom where ever it needs...

Thanks for sorting out the vid for me mate and thanks for the kind words. My mate Ada made me a blanking plate fot the bandit tank today. http://i995.photobucket.com/albums/af77/CBRRRT/20121023_194922.jpg and I exposed all the wiring to get a better idea of where I'm going to mount stuff, and what b...

Welcome mate

[youtube][/youtube]

I also fitted LED tail lights from a GSR600 er, the wrong, or for me anyway the right way up, lol

I welded caps on the frame with an M6 thread in the center. Then mounted the spikes my mate Ada made for me http://i995.photobucket.com/albums/af77/CBRRRT/20121022_190646.jpg I got the idea for this from Preditor. When he removed his helmet he had those four big wombles teeth http://i995.photobucket...

They arrived and when I saw them so did I. First I made a template http://i995.photobucket.com/albums/af77/CBRRRT/20120830_185929.jpg then set out the position for them and the cut outs http://i995.photobucket.com/albums/af77/CBRRRT/20120830_190525.jpg I drilled lots of holes then removed the bit I ...

When its finished the visor will be in the half up position and inside there will be two round tail lights. when I break the person will see two red eyes glaring at them

Didnt know I had a choice of carbs to be honest